🦸 Power Up with the Intel Core i7-10700K Avengers Collector's Edition Processor - 8 Cores up to 5.1 GHz Unlocked LGA1200 (Intel 400 series chipset) 125W Review

The video card that took part in the rtx 3080 tests. Motherboard ASRock Phantom gaming 4 Z490. The starting temperature in the room is 24 degrees, after 4-5 hours of work with dropsy the temperature in the room rose to 27 degrees only due to the computer, the room is 12 squares. When working with my previous aerocool 3 rgb cooler, the percentage overheated and reached 80-100 degrees when playing at maximum speeds in about 10 minutes. I attached a photo with what it was before installing dropsy,

At the end of 2022, the top processor. It is quite possible to use before the video card is taken. I took a cooler for it @ tower at 185tdp, because it was limited in money, but the temperature in the load does not exceed 50, but for overclocking, of course, dropsy is necessary. And so the percentage is normal, but at the moment 2022 can already be compared with the new model in terms of speed.

Switched from 5820k, the performance leap is noticeable. Even in games, an average of + 30% fps with RTX 2080. I don’t see the point of overclocking. About cooling. The processor cooler Noctua NH-D15 is used, the mother is MSI Z490 Unify, the Silverstone FT02 case, the mother is located in it with ports up, at the top there is one 140mm fan for blowing out, at the bottom three 180mm for blowing in (one blows into the D15 radiator, which in turn blows into the upper 140mm, so even if you stop…

it was time to change the old 6700k, took 10700k + CO from the kraken + ASUS ROG STRIX Z490-H GAMING . calmly takes 5 kilos . in games the difference is about 20-30% in adobe primer, the boost went just with a bang render became much faster . (taken at the end of May 2022) very satisfied with the process

Motherboard MSI MPG Z490 GAMING EDGE WIFI, dropsy be quite pure loop 360 (in the future I will put a more powerful percentage, I took dropsy with this calculation). Prots works at a frequency of 3800-4000 without lags and blue screens. I have not seen a temperature above 35 degrees, taking into account the fact that I play on the built-in.

As for scalping and replacing the "solder" with ZhM, it certainly brought a decent result. without a scalp, in stock without overclocking, the temperatures in Hades were 85-88g (the hottest core) with a scalp of 70-74g (the hottest core). In acceleration to 5000 without a scalp - the temperature in Hades quickly exceeded 90g and into failure. after the scalp, it worked stably at 80-85 (the hottest core). If the hands are straight, then scalping is certainly worth it. I accidentally ruined my…

A new processor on an old process technology (obviously penultimate or last), requiring a motherboard replacement. The production has been fully worked out, this stone is a squeeze of the last drops from an already, in fact, outdated technology with all the ensuing advantages and disadvantages. be quiet pure base 500 enclosure Cooling - deepcool captain 360 All cores 5.2 MHz Voltage 1.35 volts Motherboard MSI MEG Z490 UNIFY In stress tests, 78 degrees with the case cover open and 85 with it…

I decided for a long time, intel or ryzen. Nevertheless, I decided that a crane in the hand is better than a in the sky. I hope the new generation of ryzens will be inferior to Intel or will be at least at the level, but not higher. And then I will regret the money spent

With its pros: Top stone, for the future, good price. You can not drive, and so the performance is abundant. Different cons: Heat dissipation. Without overclocking, in the Aida64 stress test. under be quiet! Dark Rock Pro 4, the temperature of the hottest core is 83 °C. For good overclocking, dropsy is needed.

Extraneous noise appeared from the socket zone, video - I have never seen such a thing, there has always been silence and the maximum where the noise came from is a video card under load (chokes). Now thiscomnstant noise infuriates me, it manifests itself when the system is idle and power saving works. The noise disappears if you turn off the s-states technology (asus strix z490f gaming), but then the processor always works at full capacity. Additionally, there were problems in games: in…

Typical school divorce. I am likewise of the opinion that the most recent generation of Hong Kong residents is revolting. The central processing units (CPUs) are never sold separately from the motherboards. Separation at the elementary school level is between AMD and Intel. Has pros: Multi-threading in the more recent generations of central processing units (CPUs), but since he is too high up at Intel, the dignity is also too doubtful and all of the vulnerabilities were through him. They ought…

Like they have done in the past, Intel chose to focus on boosting the megahertz of its processors. For I can still vividly recall my Stump 4 from the distant year 2022, which was capable of working at a frequency of up to 4 GHz and tore everything and everyone apart with its power. Following the switch from single-core to multi-core systems, an essential component was removed, the number of cores was raised, and the clock frequency was decreased. I stayed at 3.2 GHz for a considerable amount of

This processor replaced my previous Intel i7 3770K, which I had. Naturally, I had to change the motherboard (I went with the GIGABYTE Z490 AORUS PRO AX), the memory to DDR4 and the storage to NVME SSD (for everyone), but the investment was well worth it because it is pleasant to have all of the most contemporary components working behind the scenes. I did not use an overclocking software, and as a result, performance was not affected. When playing RDR 2 with an RTX 2070 Super card with Ultra…

Time to upgrade from my aging 6700k, so I went with a 10700k, a CO from the Kraken, and an ASUS ROG STRIX Z490-H GAMING desktop. Takes 5 kg in a relaxed manner. The variance in video games is between 20% to 30%. That all went off with a bang in Adobe Primer, making rendering significantly quicker. (completed in the month of May, 2022) complete contentment with the outcome

Dropsy be quite pure loop 360 on the MSI MPG Z490 GAMING EDGE WIFI motherboard (in the future I will put a more powerful percentage, I took dropsy with this calculation). Prots can run at a frequency of 3800-4000 Hz without experiencing any hiccups or blue screens. Considering I use the in-built, I have never had a temperature higher than 35 degrees.

I have been using the processor for less than a month. Very satisfied. Takes 5.1Ghz to all cores at 1.33v easily, but the stone is hot 36-40 simple under dropsy NZXT Kraken X73. In stress tests 74-78. In games, the temperature is <60. A good stone for games for your money.

While the hands have not reached the point of understanding overclocking, how I will do it, I will supplement the review. With its pros. In stock, without overclocking, it keeps 4.7 for all cores at 100% load, the mother of Gigabyte gaming x, heats up to a maximum of 55 (Noctua NH-D15, and even then - without one cooler, because it does not fit due to high RAM). Overall, after the i5, the 6500 feels like jumping from a donkey to a Lamborghini. Has some cons The OEM version came with scratches…

Selected for work and occasional gaming, bundled with RTX 3070 graphics card. At the time of purchase, the prices for video cards are unrealistic, so I play without it, and the graphics core of the processor drags BF4 at low settings in 1920x1080! This, of course, will not replace the video card, but it's nice. Word and Excel still lag. Has some pros Good performance with acceptable heat dissipation. Good performance of the graphics core (shocked myself). With its cons. Poor packaging in BOX

Usual school divorce. I also consider the last generation of Hong Kong to be disgusting. CPUs are not sold separately from motherboards. Divorce of the kindergarten level is that of AMD, that of Intel. Has pros: Multi-threading in the younger line of CPUs, but since. he is too hot at Intel, the dignity is also too dubious + all the vulnerabilities were through him. In this generation, they should have closed them, but this is not certain. Has some cons The price, the old technical process, the…

Most motherboards have power-saving features disabled by default, so the processor runs 4.7 out of the box at settings that are gentle on heat and power. The temperature with a good air cooler, even in stress tests and long-term loading at 100%, does not rise above 75 degrees. At 5.0, it also starts up without problems, but - the temperature in the load immediately goes to 90 and even higher. Personally, I decided that I did not need it.