Header banner
Revain logoHome Page
ispring reverse osmosis pmp5 water booster logo

iSpring Reverse Osmosis PMP5 Water Booster Review

3

·

Poor

Revainrating 2.5 out of 5  
Rating 
2.7
💧 Water Purification, ⚙️ Filtration

View on AmazonView on ЯM

Media

(3)
img 1 attached to iSpring Reverse Osmosis PMP5 Water Booster
img 2 attached to iSpring Reverse Osmosis PMP5 Water Booster
img 3 attached to iSpring Reverse Osmosis PMP5 Water Booster

Description of iSpring Reverse Osmosis PMP5 Water Booster

This pump can boost water pressure up to 80 psi. 1/4 inch fitting. The booster pump can be mounted in several positions such as Reverse Osmosis system, etc. to increase the water pressure. Safe power operation with low energy consumption ( low Voltage - 24 volt). Works with 50 gpd, 75 gpd, and 100 gpd ro systems. Compatible with most reverse osmosis systems in the market. Tips: Transformer is Not included. Please Note: If you want to add this booster pump to the RO system, you may also need other accessories to automatically turn on / off the system, such as the Lower & High Pressure Switch, Feed Water Solenoid, Auto Flush Solenoid and a Transformer. If you want more details, please contact our technical customer service.

Reviews

Global ratings 3
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    1

Type of review

Revainrating 2 out of 5

Kit does not include required parts due to high cost

My downhole pump pressure of 5psi is too low for the iSpring reverse osmosis system, so I had to shell out this expensive pump. Not only does it not include a power transformer, proper reverse osmosis pipe connections or a pressure switch, it doesn't even include instructions or screws to assemble it! In fact, there were no documents in the box at all. I don't even know if it's under warranty. For such an expensive part (compared to the rest of the system) just to bump it up to 5psi I am very…

Pros
  • Booster pump can be installed in multiple positions e.g. B. reverse osmosis, etc. to increase the water pressure.
Cons
  • Drill Pack

Revainrating 5 out of 5

Requires some assembly but does the job perfectly

This is a great pump (my pressure went from 40psi to 110psi) but you can make it yourself. If you want to install this you need to buy some extra parts. - DC Power Supply: LED Wholesaler AC/DC Power Supply 24V 2.5A 60W 5.5x2.5mm DC Plug with Spring Terminals Black UL Listed 3206 -24V - Power Jack To connect the pump to the power supply: Kenable DC PIGTAIL connector Bare 5.5 x 2.5mm power jack for 0.3m (1ft) monitoring cable - iSpring # 0604ME (4046K) NPTF MALE ELBOW - 1/4 NPT x 3 / 8" Male NPT…

Pros
  • This pump can pressurize water up to 80psi. 1/4" fitting
Cons
  • Slightly dented

Revainrating 1 out of 5

Don't buy good kitchen and bathroom appliances

First of all I would like to apologize. I work with beverages to make a living. I would be an expert on anything to do with beverage lines, pumps and the systems that use them. That's a big mistake. Very expensive for the money compared to an excellent commercial pumping system. It has to be a kit. Don't do it yourself? The risk of leakage is not justified. I apologize for trusting Mfg to provide a reasonable solution. I do this all day so I need an economical option. The device has no pressure

Pros
  • Safe operation with low power consumption (low voltage - 24 volts)
Cons
  • Not sure