Header banner
Revain logoHome Page
50pcs jiuwu 8 pin double side prototype pcb printed adapter board for so msop tssop soic sop8 to dip8 logo

50pcs JIUWU 8 Pin Double Side Prototype PCB Printed Adapter Board for SO MSOP TSSOP SOIC SOP8 to DIP8 Review

4

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(4)
img 1 attached to 50pcs JIUWU 8 Pin Double Side Prototype PCB Printed Adapter Board for SO MSOP TSSOP SOIC SOP8 to DIP8
img 2 attached to 50pcs JIUWU 8 Pin Double Side Prototype PCB Printed Adapter Board for SO MSOP TSSOP SOIC SOP8 to DIP8
img 3 attached to 50pcs JIUWU 8 Pin Double Side Prototype PCB Printed Adapter Board for SO MSOP TSSOP SOIC SOP8 to DIP8
img 4 attached to 50pcs JIUWU 8 Pin Double Side Prototype PCB Printed Adapter Board for SO MSOP TSSOP SOIC SOP8 to DIP8

Description of 50pcs JIUWU 8 Pin Double Side Prototype PCB Printed Adapter Board for SO MSOP TSSOP SOIC SOP8 to DIP8

The board is double-sided, front side is wide, back side is narrow. 50pcs boards in one package. When confirming that the number of pins is sufficient, the quick check only needs to check the following three dimensions: pin pitch, chip and pad width. Can be directly inserted in the 8pin IC socket, can also be directly inserted in universal board or breadboard and other experimental board. 100% brand new and high quality.

Reviews

Global ratings 4
  • 5
    4
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Works best in breadboards and accessories

I've already used almost half of these with no problems. The only thing to note is that pin 1 is different on each side, which is important if you are installing it upside down. The number 1 printed on the board is sometimes erased during the trimming process, so with some it's not obvious which pin 1 is, but most of them are fine and all are certainly usable. I will definitely buy more when they run out.

Pros
  • 50 boards per pack
Cons
  • boring pack

Revainrating 5 out of 5

Perfect! Suitable for SOIC8 on one side and .

Excellent! Fits both SOIC8 on one side and a smaller mini version on the back. The holes on the sides are perfect for connectors, allowing you to quickly prototype non-DIP chips on a breadboard, then solder them straight away and use this chip in your projects.

Pros
  • 100% brand new and high quality
Cons
  • High Price

Revainrating 5 out of 5

Brilliant. Interfaces

They are great. However, the solder paste I use seeps under the soic and small tiny balls of solder ooze out of the ends of the soy. To solve this problem, I use a thin silicone strip in the middle between each group of pads, then apply Soic and let it dry for a couple of hours. Then simply use the paste as usual.

Pros
  • Can be directly plugged into the 8-pin IC socket, can also be directly plugged into the universal board or breadboard and other experimental boards
Cons
  • Obsolete model

Revainrating 5 out of 5

Excellent quality, good price.

Some of these have been used and are great for breadboarding ICs that only come in SMD sizes. I would recommend/buy. Liked the black mask.

Pros
  • Double sided board, wide front, narrow back
Cons
  • Blank