🎙️ K&M 23550.500.55 Adjustable Microphone Bar - Dual Microphone/Boom Stand Attachment - 5/8" Thread Connector - Professional Grade - Made in Germany - Black Review

The strap is solid and inexpensive, with serviceable (separately replaceable) parts on each microphone-threaded piece. That and a pair of quality condenser mics are just what you need for recording with any narrow stereo technique. The riser attaches to the usual threads on a mic stand or boom, as usual, and the mic mounts attach to a movable pair of threaded devices in the grooves. The greatest distance between the two microphone arms is 173 mm, slightly more than the 17 cm of the ORTF. I…

This rod is beautifully finished and durable. The good/bad news is that it comes with adapters for standard 5/8" threads. To tighten the microphones enough to stay where you want them, you must tighten both the microphone adapter and the adapter stem to the same torque. When you take it apart, the adapter stays on the mic, not the pole. You cannot prevent this since the thread with the smaller diameter always unwinds first. The real issue other reviewers have pointed out is that the included…

Honestly, I'm very disappointed in this stereo. I have other K&M gear and it's really top notch. However, they have some serious problems. First, you need one Use adapters to screw on a regular mic clip. Adapters are included, but when you unscrew the mic clamp, the adapters usually get stuck in the clamp instead of staying in the pole. At least, You had to use adapters with a screwdriver slot - I usually see this on other adapters like this, but they don't have one, making removal very…