Labwork Parts Cylinder 15815 R70 A01 15815R70A01 15845R70A01 Review

Ordered Thursday night and received 3pm Saturday. O-rings said to be made in China. You don't get that from Honda. Replacing the old one took about 45 minutes. I had a leak in the first 15 minutes after starting the car. This is a 2009 EXL Accord at 248k. The leak was only visible when the engine was first started. It dripped onto the generator and eventually onto the exhaust. Sitting in the light you could smell burnout when the air con was on. The orings were of very good quality and fitted…

Parts came from "Made in China" black plastic bags. The top seal was warped from the uneven pouring process. The one piece screen bottom gasket appeared to be similar to the original part, however there was a 2.5mm air pocket under the rubber surface. This was a weak point, and if exposed to heat, the gasoline-contaminated motor oil would likely bulge and crack, creating a leak path. No thanks, I sent them back. Thanks for the uncomplicated right of return! Purchased Dorman aftermarket kit part

2011 Honda Accord v6 VVT Gaskets were leaking, I replaced them with these, they fit and seal well, no problem now I didn't know the 3 bolts hold the VVT The solenoids were only tightened to 6 ft-lbs or 72 in-lbs, so I pushed them down and ran the car 15 miles late. I got a P3497 check engine light with bad misfires. I had just changed my engine oil and filter a week ago and noticed the gaskets were leaking so I changed them, anyway I loosened the bolts and tightened them to 6ft-lbs, drove the…