Lenox Tools 10833800RDG Diamond Reciprocating Review

Used this saw blade to cut through a thick metal post in the yard that had an old satellite dish on it. I lubricated the blade with cold water and it cut through the bar with relative ease. I recommend this blade for all heavy cutting work.

Purchased to cut 4" cast iron pipe. He coped with this task quite well. 4 cuts with it before it failed. Lenox is NOT cheap but did the job.

So far I've managed to make two cuts with a blade through a 4 inch cast iron pipe. I cool the blade by dipping it in a bucket of water about every minute. saws. Cutting discs are much faster, but there is not always enough space for the cutting disc. I think I can do 3-4 cuts per slice which I think is worth the cost.

I've always been a fan of Lennox blades since they showed the Sawzall guy flying an airplane half a year ago disassembled . This diamond studded blade cuts very well, doesn't overheat, but needs a drop of oil or water from time to time. I use it in a De Walt 20V saber saw with great results.

I've never had luck with those sharpened blades. Bought to cut a 1/4 wall steel pipe in my backyard that once held a satellite dish. I used a wax lube and nothing, barely made a dent in the steel and all the sand was gone. I ended up using serrated carbide blades, which worked great with lube, and taking frequent breaks to let things cool.

After cutting a 6" square at the top of my septic tank, the concrete cover with a 7" circular saw to install the septic tank. I had to make the final cut at the ends of the square. I drained the water to lubricate and cool the blade while I trimmed the ends of the 6-inch square with a Makita 18V reciprocating saw. It took a while but it worked and the blade looked good after I was done. good blade.

I'm a complete novice and by no means a professional plumber, but I needed to fix my broken 4" cast iron main pipe! This diamond blade cuts through with a lot of time, patience and effort on your part! It's advisable Always using a spray bottle to keep the pipe and blade wet. The diamond blade made four full cuts for me which has helped me save about $600 on plumbing bills! If you have the desire and pride to do your own renovation , you won't be disappointed, remember it will take some time so