🚦 Red Lens LED 3rd Third High Mount Brake Lights Stop Lamp for 2003-2016 Ford Expedition/Lincoln Navigator Review

Bulbs in current 3rd taillight need replacing and I ordered it so I don't have to change them again. Added a ton of looks and was pretty easy to install. I used factory screws and washer fluid nozzles.

Expecting to leak as others have said. There is a gap at the top that was not present on the standard bulb. I'll probably use clear silicone to fill the gap in hopes of preventing leakage. But the light is bright and the spray nozzle snaps into place like it did at the factory. I recommend buying another brand.

Installed this item on Ford Expedition 2015. 15 minutes for installation. This unit had more light than the OEM and was much brighter. Now the car will surely notice those third LED brake lights in the back when I stop. A good product. Also install new LED brake lights. Bright lights at the rear of the car are key to safety. Let her see you before it's too late.

The old headlight is corroded and cannot be replaced. new washer nozzle. Installation took about 10 minutes. I used a Philips drill to remove it, but I used a hand screwdriver to tighten the screws to keep the small washers from deforming. The LEDs correspond to the brightness of conventional brake lights.

Was hoping to get a replacement identical to the original. When I opened the package, the brake light was camouflaged in olive green. I was expecting to see a regular "red" brake light but was unexpectedly disappointed with what I got. I put it on and noticed that it wasn't what I expected or wanted, but since I had already bought it I figured it would be more difficult to take it off and put it back on, so I kept it. Signature, upset!

Much smaller than at the dealer or "professional"! Easy to assemble, looks better than the original, new seal prevents water ingress in heavy rain and much brighter than factory! Lighter = safer 5- 10 minutes for anyone who can install if you have the right tools. The following may be required: 1. A small step stool depending on the height of the ship.2. Phillips screwdriver for 2 screws.3. Something to remove sticky residue from the original pad.4. Something to prepare the car's surface for…

The third red LED brake light was perfect for my 13 year expedition. The plastic is a little lighter red than I expected, but that may be due to the age and faded plastic of the bulb I replaced. The only two other things I noticed is that the sticky seal with glue on both sides is hard to remove because you have to make sure you line things up, and it's hard to pull off when part of it hits the metal hits when you are try to align it like the old one and also align the screw holes before…