MAPORCH 304 Stainless Steel Mesh Screen - 5 Wire Woven Metal Mesh 29Cm X 60Cm (23.6” X 11.4”) For Ventilation, Animal Cages, Security, And Cabinet Applications (1 Piece) Review

We recently moved and the kids wanted to build a bat house. This required a certain type of screen to be installed inside the the long slats of wood that are placed close together for the bats to cling on while inside. This screen was just the item we needed at such a low price. it comes folded but without a permanent crease in this large decorated box. I save a bunch a time by only have to the cut in the middle so I had two pieces and not trim the sides. The screen can be cut with heavy duty…

So I bought this to cover holes behind the gas stove where mice were getting in. I had to cut it and it wasn't easy to cut but wire cutters did the trick. I used a staple gun to hold it into the wall and it worked liked a charm. The holes, previously covered with steel wool (didn't work) and spray foam (also didn't work) are now covered and so far, so good.

I purchased to cut out 2" circular screens for my bait well course pre-screen. Although it is welded together around the edges, the middle is not, so it comes apart. I fixed that when it was epoxied in place, but was expecting all of it to be welded not just the edges. But the competition is not even welded along the edges, so it was the best thing out there for my application. It is stainless, so should last a long time. Works great.

The product does not match the blowup picture on the box. Disappointment. The match is not a woven screen. Which seems to be a less strength factor for me I do not see very many welds as the advertisement for claims. I do not have it mounted on the car so I cannot attest to its strength as of yet. These minor undesirable aesthetic defects, for me, will not inhibit me to use the product. I cannot read it more than a three star.

I thought the price was a little stiff, however, the product is extremely well made. I did not suffer from the common complaints about lack of weld points for every intersection. You can see how I used this above. I cut the 1 piece in half with wire cutters, then folded it on top of my exhaust, then rolled it around the exhaust, then finally, attached to the exuast event with 3 stainless steel zip ties. Stainless steel zip ties. It would help if you had these too :)

I used this to make a sifting screen for shark tooth hunting. It’s sturdy and holds up great, but it arrives folded. Mesh screen may be less aesthetically pleasing than other options!

The mesh is good quality and it did what I needed it to do. However, the welds were very weak. As I cut the material to the size I needed the welds broke on many of the joints.

Excellent product ! Very easy to cut and fold, it help me a lot on my mechanical projects that I’m working on. If you were a mechanical student like me, I would definitely recommend it.

I ordered one sheet approx 1' x 2". I got 2 pieces each 1' x 1'. The packaging indicated it contained 2 pieces 1' x 1' so the error was at the warehouse not at the factory. This was not a big problem for me but it could be for someone who really needed the single larger piece.

Product is advertised as "welded." And it is.but ONLY around the perimeter. If you trim it even a little bit to fit your needs, as indicated that you can on the packaging and in their ebay description, it absolutely falls apart and you are left with a pile of stainless steel wire. Very dishonest in their advertising. Other reviews indicate the same problem but apparently that is not enough to get the mfr to change their deceptive claims.

Used this product to make a rustproof mesh on the intake air inlet of my 2006 ram air intake. Product keeps out debris from getting into air intake. Mesh is stiff enough to hold its shape and prevent rocks and road debris from deforming mesh.

Great quality and thickness. Bought for the top of our chimnea to catch any burned paper debris or embers from floating off.

Use it on my grills and smoker, works great. Easy to clean and trim to size. I just wish it was a little wider so it would have fit my traeger in on piece.

This stain less steel wire mesh is tough. I couldn’t cut it with shears, wire cutters, tin snips or some gigantic cutter thing that was loaned to me,don’t know what it was called. I finally got the Dremel out and cut it easily. If you buy it better have a grinder or dremel or you won’t be cutting it. Made a perfect predator guard for bluebird house.

They claim this is an upgraded design that is welded and won't fray and fall apart. Sure as long as you don't cut it and use the whole sheet. Only perimeter edges are welded and once you cut into it it will lose its shape and start to come apart. No way this is german made. Germans wouldn't sell this junk.

We used the mesh screen wire sheet to make a home-made bin cage for our upcoming hamster. The mesh screen is made of stainless steel, very sturdy. It came in folded, but it is very easy to unfold and make it flat. We can't wait for our hamster to come.

This mesh was the perfect size I needed, and the perfect thickness. The mesh spacing was exactly what I needed, and I can probably re-use this for different purposes.

I bought these to cover outdoor PVC pipes and keep critters out. It was easy to cut and zip tie over the pipes. I’d highly recommend!

I used this SS mesh to cover my gas fireplace exhaust vent after the regular steel screen rotted away making a perfect home for birds. I cut it to size with shears no problem and used SS screws to attach it.

Very easy to work with, pliable but very sturdy. I used it to cover exhaust and dryer vent, birds removed the original plastic vent. This product and a few zip ties solved my issue.