🚰 Moen 159060 Hose Management System: Simplify Pullout/Pulldown Operation with Hose Guide Review

I think it would be great if you had a drain hose on your faucet. Since it was advertised to work for both pull and pull hoses, I took a chance. We have a side sprayer next to the sink that rises. This product didn't work for us at all. The opening at the top is so narrow that once installed the hose would not pull out at all and if I pulled it out it would not go back into the hose catcher. Several attempts to adjust the product to fit the drawtube were unsuccessful and I was essentially left…

Such a simple device with amazing functionality. Maybe it could be a piece of plastic, but it's thanks to the little blue clip that this device works. It really works. Who doesn't have a mess of household chemicals, sponges, or rags under the kitchen sink? Rzhunimagu! But even if you don't, there are hot and cold water lines and then a dishwasher line, your drain pipes. So the train always finds its way to the hook. This device really works! No more snags and confusion. It took me 5-6 minutes…

We didn't want to switch to a faucet after hearing several complaints from family and friends. It turned out that in both situations, their faucets weren't working properly because of other plumbing (like garbage chutes, etc.) or stuff they'd "put" under the sink. This arrangement simply allows the hose "loop" and counterweight to move up and down freely. As others have said, you could probably make one of these yourself, but the included clamp mounting hardware is worth it. BTW the plumber…

I had a hard time installing this unit on the new Moen 87557 pull out faucet. There was very little space at the top where the hoses went into the cabinet and the spray hose push-in fitting was actually on the side of the other hoses. To complete the installation I had to cut about 1 1/4" off the top (opposite where it's going to be cut off) of the rail. I then attached the blue clip to the rail with a piece of tape on the outside of the pipe. Then I put a clamp on the hose from the outside of…

I just installed this about 15 minutes ago. I usually wait about a month before reviewing products to see how they are holding up. It took longer to clean things in the closet than to install them. Once I did that, it worked great. I turned around and told my wife that this is one of the dumbest inventions I've ever bought, but I can already say that the problem is solved and it works like a champ. I'm a curmudgeon and my wife was willing to turn down a $200 new faucet. I was thinking about…

Given the almost limitless number of obstacles under the sink, this won't work for everyone. However, it is quite intelligent and works in many applications. It worked 90% of the time for my application. I have a simple configuration with two sinks and a pull-out faucet from Moen. Initially, my hose caught on the shut-off buttons. I was able to move the hose to a new spot, but once you start pulling on the faucet, the hose can move to a position where it can snag again. I also had a…

My hose was stuck on faucets so I stopped using the hose until I found a solution. I've searched for similar problems. I did not find this product at first. It took some time to discover this hidden gem. Perfect fit for my Delta 9178-AR-DST Leland exhaust hose. For myself, I attached the blue Moen clip to the inside of the blue clip on the Delta (where the two hoses connect at the top). The blue Moen clip perfectly matches the rectangular Delta clip. It is tight, but makes the hose connection…