Header banner
Revain logoHome Page
mssoomm sfu1204 machining supports coupler logo

Mssoomm SFU1204 Machining Supports Coupler Review

2

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
🔧 Linear Motion Products, 🔩 Power Transmission Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to Mssoomm SFU1204 Machining Supports Coupler
img 2 attached to Mssoomm SFU1204 Machining Supports Coupler
img 3 attached to Mssoomm SFU1204 Machining Supports Coupler
img 4 attached to Mssoomm SFU1204 Machining Supports Coupler

Description of Mssoomm SFU1204 Machining Supports Coupler

Ball screw diameter: 12mm; Lead / Pitch: 4mm; Total length: 15.75 inch / 400mm; Nut + BK10/BF10 End supports with locknuts and circlips + Flexible Coupler / Coupling (The coupler bore for the motor shaft is 5mm in default), Precision C7 Grade. Long service life time due to low friction, low operation noise; No stick-slip effect, heats up less, reduce driving power required. Small starting torque, able to apply high speed and micro-feeding; High static and dynamic stiffness, high and more accurate positioning. As a professional seller, we can provide complete information of the products, the drawing is showed in the image 2.(If you need CAD and 3D modeling files, you could give us Amazon Message). As a factory seller, we have full ranges of ballscrew products ( some are showed in image 5 ), and provide customized service, any special needs, please let us know.

Reviews

Global ratings 2
  • 5
    0
  • 4
    2
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Smooth Linear Motion Coupler for Precision

After i put it to the test I was impressed with the smooth and precise linear motion this coupler provided.It works flawlessly in my DIY project and is built to last. The coupler is an essential component in any industrial and scientific motion system. The only downside is the price, but the quality justifies the investment..

Pros
  • High precision machining support
Cons
  • Limited compatibility with certain models of SFU1204 couplers

Revainrating 4 out of 5

Looks good. I would rate it 4.5 out of 5.

Looks good but bearings (bf-10 and bk-10) are difficult to mount, too tight a fit - shaft 9.99mm, bearing with an ID of 9.99, had to shaft clean several times and remove sandpaper scratches. Although there is no play in the supports after assembly, the nut on the shaft visually has no play, but rotates freely with ease.

Pros
  • As a factory seller, we have a complete line of ball screw products (some of which are shown in Picture 5) and provide customized service. If you have any special requirements, please let us know.
Cons
  • Not as thick as other choices