Header banner
Revain logoHome Page
pneumatic stapler fubag f50 finishing, for nails 10 - 50 mm, 40 l/min logo

Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min Review

8

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.5
Industrial and Scientific, 🛠️ Industrial Power & Hand Tools, 🔧 Industrial Power Tools, 🛠️ Industrial Power & Hand Tools

View on AmazonView on ЯM

Media

(8)
img 1 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min
img 2 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min
img 3 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min
img 4 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min

Photos by authors

(4)
img 9 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min
img 10 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min
img 11 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min
img 12 attached to Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min

Description of Pneumatic stapler Fubag F50 Finishing, for nails 10 - 50 mm, 40 l/min

The Fubag F50 nailer finisher simplifies and speeds up house building and finishing work where minimal visibility of fastening is required. Ideal for mounting lining, finishing materials, decor elements, siding, block house.

Reviews

Global ratings 8
  • 5
    5
  • 4
    2
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

The best purchase in my life, I will definitely buy it again.

Came new and when opened, the fuse mechanism was already bent. Very unpleasant. Easily straightened, but it's bad that it is shipped this way and deformation is allowed during transportation. But in principle, if you need to massively hammer a wagon or some other finishing materials that do not require an ideal appearance after installation, then this gun is very good for its money.

Pros
  • A very inexpensive pistol. Bought for the object under the lining. Worked and didn't let me down. It scores well. Compact. There is a wall where you can direct the air outlet so that it does not accidentally hit your eyes or face. Recharges easily and quickly. If a nail is stuck, it is easy to open, remove and close without wasting much time. The metal is good, I don’t kill, if the nail is squeezed in the table, that is, the end of the nail, and the trunk was cleaned of the remains, closed and popped on.
Cons
  • There is no hook so that you can hook it on a belt, a belt, and often you need it. Sometimes misses nails. (there is one in the store, but it happens that the blow falls at idle, which is not very good, as it leaves a dent from the striker) Not a well-thought-out safety mechanism. It is not always convenient to aim at the place where the nail is hammered. There is no impact force adjustment on the gun itself, but it does not matter if it is on the compressor.

Revainrating 4 out of 5

Nice price, good quality.

Before buying this pistol, I took a used American Senco from my friends for 10 years already. Works like an automatic. Comfortable as hell. Its price is three times more than this.

Pros
  • Price. Repair kit (striker and rubber bands)
Cons
  • Often hits two nails.

Revainrating 3 out of 5

Nothing unusual, a normal product.

I do not recommend if you do a lot of decoration. although in 2 years I finished no more than 10 rooms and did not even spend the entire pack of 5000 Some pros: good pneumatic stapler, works great with different nails. not suitable for imitation of timber, in my opinion Cons below: the striker died 2 years later. an autopsy showed that the aluminum fell apart, and the new one costs as much as half of the stapler itself

Revainrating 4 out of 5

I recommend to buy, the product is of high quality.

In general, I recommend the tool. Fubag as usual does not fail. Pros: The gun is of high quality, corresponds to the description, the air does not poison, hammers nails perfectly, there are practically no traces of the striker. Its cons: Came in a damaged package, with traces of oil and fingerprints on the handle. I did not refuse, because. really needed for work. But I still bought a new one, but I didn’t get it very much.

I use a tiny lubricator with fubak oil, I strike nails ranging from 10 to 30 mm in length, and I always use nails manufactured by the same business when I use a nailer in my line of work. It never fails and no one ever complains about it. Pleased with the instrument. It's been less than a year since I started using it. I would suggest.

Revainrating 5 out of 5

The quality exceeds all expectations, I recommend to buy.

Maybe I'm just so lucky, maybe something else - but I've had a Fubag compressor for 7 years already, he endured such a poor thing - that many brands can't even imagine . Several pieces of pneumatic tools are already in use - the last one took a pin- driving gun, in total after the purchase I scored about 300 pieces of 35mm studs, at the moment I am equipping my carpentry workshop, so I use it so far only for landscaping. But during this time, work came across on the restoration of ancient…

Pros
  • Build quality, equipment, especially the percussion piston repair kit.
Cons
  • I have never noticed any problems with this brand.

Revainrating 5 out of 5

I am amazed at how well made the product is, just magical!

In my work, I often use nailer, it works without failures and complaints, I use a mini lubricator, fubak oil, I hit nails from 10 to 30 mm., I take nails of the same company. Happy with the tool. I've been using it for less than a year. I recommend.