Enhance Radar Detector Performance with Mirror Mount Bracket for Uniden DFR Series Detectors Review

The mount itself works reasonably well and is easy to install. It comes with two sizes of screws in case you need longer or shorter screws to attach the bracket to your reading mirror. I suspect most will use the short ones, but you have options - some reviews mention the screws aren't long enough. Maybe it was a change based on product reviews? However, they are. My only concern is that the horizontal bar, which is then screwed in with a metal clip, will block one of the sensors ("eagle eye")…

I bought this for Uniden R3. The clip works. Basically everything works on the mount. In addition to short Chinese bolts. I had a problem with this mount. There are 2 custom made "wings" that clamp the adjustable center piece. This is so you can adjust and tighten it in place. I don't know if mine broke or if anyone has ever made this thing, it's just cheap but the end of the screw is barely long enough to catch the threads. Maybe a thread packs. He couldn't tighten it enough to hold the…

Bought 2 - one for a Subaru Outback, the other for a Ford Transit. I've installed Uniden R7 units and DVRs in both - while the cheap useless cable sets I ordered didn't work, this mount has DID! It's easy, took literally 5 minutes to install and holds R7 blocks perfectly. While there is "somewhat" flex, it's a very strong mount. In any case, the play is significantly less than with suction cups. Overall for $ one of the best values out there. There are far more sophisticated products out there…

I have a 2021 BMW 3 series and am using Uniden R3. I had my windshield tinted and didn't want to use suction cups or sticky mounts. So I looked for an economical solution other than BlenderMounts(139). I was pessimistic as it had mixed reviews. It turned out very well. The product itself is all metal and comes with all tools included. Follow the instructions and it's pretty easy to assemble. I also used duct tape to keep metal from rubbing against metal but other than that it was solid and I've

I bought this for the Uniden R3. The clip works. Basically everything works on the mount. In addition to short Chinese bolts. I had a problem with this mount. There are 2 custom made "wings" that clamp the adjustable center piece. This is so you can adjust and tighten it in place. I don't know if mine broke or if anyone has ever made this thing, it's just cheap but the end of the screw is barely long enough to catch the threads. Maybe a thread packs. He couldn't tighten it enough to hold the…

Bought 2 - one on a Subaru Outback, one on a Ford Transit. I've installed Uniden R7 units and DVRs in both - while the cheap useless cable sets I ordered didn't work, this mount has DID! It's easy, took literally 5 minutes to install and holds R7 blocks perfectly. While there is "somewhat" flex, it's a very strong mount. In any case, the play is significantly less than with suction cups. Overall for $ one of the best values out there. There are far more sophisticated products out there that…

I have a 2021 BMW 3 Series and am using a Uniden R3. I had my windshield tinted and didn't want to use suction cups or sticky mounts. So I looked for an economical solution other than BlenderMounts(139). I was pessimistic as it had mixed reviews. It turned out very well. The product itself is all metal and comes with all tools included. Follow the instructions and it's pretty easy to assemble. I also used duct tape to keep metal from rubbing against metal but other than that it was solid and…