Description of Rechargeable LED headlamp with flexible COB panel and USB motion sensor (HT-116)
This model combines two light elements independent of each other in one housing. Side on a powerful XPG diode, main on COB LED strip. A hand wave sensor is built into the flashlight control unit. If it is activated, then turning off and on the flashlight can be done by waving your hand. Without activation, the flashlight is turned on and off with a button. To activate the sensor, you must turn on the lamp with the on / off button and activate the sensor by pressing the neighbors buttons. When the sensor is active, the light will change color from red to red-green. After that, the flashlight can be controlled by swinging. To disable the sensor, press the on/off button. The sensor will be in active mode until the battery is discharged, after the battery is discharged, you need to turn on the sensor again. Please note: the sensor reacts not only to the hand, but also to any other objects, for example: they came close to the wall. Therefore, when working in cramped conditions, it will be more convenient to turn the flashlight on and off manually. The sensor is triggered at a distance of up to 15-17 cm. Flexible. 6 lighting modes. Operating time from 2 to 8 hours, depending on the operating mode. Motion Sensor. Characteristics: • Brightness: 350 lm • Lighting range: 15 m • Motion sensor: yes • Motion sensor range: 5 cm • Flashlight glow modes: low beam (100%, 50%), high beam (100%, 50%) , motion sensor, stroboscope • Possibility of focusing the ZOOM beam: yes • Range (at max. focus): up to 900 meters • Operating time: from 2.5 to 8 hours (depending on the glow mode) • Materials: rubber, plastic • Degree of protection : IPx4 • Color: black • Dimensions: 280 x 32 x 21 mm • Box dimensions: 10 x 55 x 35 mm • Weight: 100 gr. Complete set: • Flashlight headlamp • USB cable for charging