Versatile Adjustable Wall Mount with Enhanced Security for Both Indoor and Outdoor Use Review

mounts compatible with Arlo cameras. Fast shipping and with mounting screws. I had trouble positioning the direction of the camera because when you try to fix the position the mount changes the position of the camera. It was a bit annoying because his block forced a position change. Had to compensate to make it work.

Great outdoor mount that easily adjusts to the camera position. However, the knurled nut that attaches the mounting screw to the camera is too large to power the camera from an outdoor AC cable. I solved this problem by replacing the large knurled nut with a small metal nut. (see photo) If the manufacturer included a small nut (nylon) in the kit, this would solve this problem.

I'm sorry I rarely leave negative reviews but these things suck. My biggest complaint is the metal screw that attaches to the cameras and the ball on the other end is rusty after a week of installation. If they were really intended for outdoor use, the part would have to be made of stainless steel. In addition, these brackets are very difficult to install and lock. The actual bracket looks like cheap cast metal that fatigues easily after being moved and re-tightened. In fact, one mount had one…

Holds securely and feels solid, but after a few weeks the metal fitting on the mount starts to rust. I'm more concerned about using them with power cords, but the wheel that tightens on the camera is large and won't let the power cord into the port. Both the bracket and the power cable are from Wasserstein! The original protective external mount that came with the Arlo Pro 2 I bought doesn't have this problem as it uses a small grip to attach to the camera. I'll try to cut the wheel off and see

At first this seemed like a good deal. Now they're in the trash. First, they are cheap fakes. The camera kit I bought included 1 secure external mount like this one and 3 magnetic mounts. I needed a stronger mount so I added these two here. From the start I knew I had made a mistake. They are slightly smaller than the factory mount and are made from much cheaper pop metal. I installed them anyway. I had trouble positioning the camera as the ball joint offered no resistance to keep the camera in

These white metal wall mounts are perfect for our Arlo cameras. I didn't trust the magnetic mount on our porch, the camera was too easy to remove and I was afraid someone would just reach out and grab it. This wall mount is the best! We hung it up on our porch next to our front door. It's about 7 feet as recommended for the camera and we were able to tilt the camera to capture people walking down the path. I can see when we're getting a delivery and also when people are walking across the lawn…

I bought these mounts based on the price and good reviews from other buyers, but quickly realized that they were unacceptable for outdoor use. After only a week on the road they started to rust. I've placed my cameras in various places in our house under our gutters, for the most part they are exposed to the rain. It's been 6 months and the brackets are completely rusted. Living in a quiet area I haven't had to charge my cameras for a few months, but now that I have to I find that the camera…

Photo 1 shows the camera mounted on an outside wall. Photo 2 shows the part with the included mounting hardware. Photo 3 shows (top) the included screw (bottom) the 1.25" screw and anchor I used instead. Photo 4 shows the included plastic wheel to secure the camera. The mount works very well, but in my opinion the supplied screws are not long enough to attach the mount to the wall. The plastic wheel that is supposed to hold the camera broke during use on each of the three mounts I use. This…

I bought these mounts based on the price and good reviews from other buyers but quickly realized that they were unacceptable for outdoor use. After only a week on the road they started to rust. I've placed my cameras in various places in our house under our gutters, for the most part they are exposed to the rain. It's been 6 months and the brackets are completely rusted. I haven't had to charge my cameras for a few months as I live in a quiet area, but now that I have to I find that the camera…

Simple, strong and painted white. These simple and fully adjustable camera mounts are hard to beat. when using the power cord. So you need to remove the plastic wheel and replace it with a standard 1/4 inch metal nut. This allows the threaded rod to be tightened when the power cord is plugged in. THIS IS A DESIGN PROBLEM. To avoid this, buy fasteners with a large metal ball as these work best when attached with magnets! Also avoid screws. Purchase drywall or decking screws. The little acres…

Photo 1 shows the camera mounted on an outside wall. Photo 2 shows the part with the included mounting hardware. Photo 3 shows (top) the included screw (bottom) the 1.25" screw and anchor I used instead. Photo 4 shows the included plastic wheel to secure the camera. The mount works very well, but in my opinion the screws that come with it are not long enough to attach the mount to the wall. The plastic wheel that is supposed to hold the camera broke during use on each of the three mounts I use.