Set Of 4 Silver Aluminum Hubcentric Rings - 54.1Mm Vehicle Hub To 67.1Mm Wheel Centerbore - Compatible With Scion, Mazda, And Toyota - Enhance Wheel Stability And Performance Review

I bought these to fit my 2012 Cadillac CTS-V with a set of Verde V99 wheels that were installed by the previous owner. Let me preface this with I had been at my wit’s end trying to fix an out of balance/steering wheel shimmy at 85mph (new tires and balanced, alignment, checked bushings, etc). Doing more research I saw where people were having similar issues at various speeds with aftermarket wheels that were not using hub centric spigot rings. The problem with mine is it had them installed, but

These hub rings fit perfectly. They are made of high quality aluminum and are accurately machined. There is a slight chamfer (taper) to make the ring easier to insert into the wheel and another chamfer to make the ring easier to install over the car's hub. That is a nice touch.The rings are a snug fit into the wheel and onto the car's hub. The wheel/tire runs true even at very high speeds. I used these on a race car. No issues at 150 mph.I have two sets of hub centric rings from this vendor in…

I received the items I had ordered as described and in the time frame they were promised. I installed them onto my vehicle with my new wheels and tires. Could not be happier with the fit to both the wheels and hubs. Would recommend European Motor Werkes to any one looking for the Correct fit for their vehicle.Tip, know what size you need before you order.

I wish these were a bit more precise. There's some slop in the fit to the wheel, which seems to negate the purpose. Not a lot, but like a half millimeter, maybe a millimeter. Enough that it's loose in the wheel, and can slip into a wheel coated with plasti-dip. Problem solved; I shoved my rings into the plasti-dipped wheels and got a snug fit, instead of stripping the plasti-dip and having slop. No reduction in vibration, but at least I feel like I've done what I can do. Meh.

Worked to mount new rims on my Z4 and get rid of the steering wheel vibrations. Shouldn't break like the plastic ones can and just put on some anti-seize after wire brushing the hubs.

I bought some rims for the ride and needed some rings for my hubs. There was two of the rings that were a little snug but other than that they work great. Very easy install and no wobble or anything like that.

Added 20 inch rims to my car and before installing the centric hub rings my car felt loose and had alot of road vibration.now with the hubrings installed 90% of the problems are now gone they arrived quick and fit better then i thought

One thing I have learned with aftermarket wheels is to always run a hubcentric ring. Never use a nylon or other plastic rings because they will always fail, steel or aluminum only.These are a quality made product with excellent fit and finish. The hub fit was spot on and the wheel fitment was the same.

Perfect fit on my acura tl hub. Perfect on my enkei ekm3 wheels. Ring tends to stick to the hub rather than rim but because it fits perfect. Chose the aluminum rings and seem very hi quality. I would not advice plastic rings.

Great for the price but were hard to get on the hubs .had to basically wedge them on but got it done .seems like they help. Thanks for attention.

These fit like a glove. I got a new set of rims from the junk yard for our civic and this made the Mazda rims fit perfect! I purchased a set of the little plastic ones and it was a horrible experience. The plastic ones flex way too much so you can bump them off-center when you try to stick the wheel on the hub. Goodyear swapped a tire for me and destroyed the little plastic ones because they couldn't get it seated straight so they just torqued it to death. I can't stress enough how good these…

OUTSTANDING! used these rings to put SUV Wheels on my EV. May not be compatible with all Mazda models! Looks real good, & has a snug fit. Highly recommend.

Seem to fit pretty good and I don't have shaking from the wheels and nothing in the steering wheel. I put these on some 18 in E39 rims that I put on an E46. One was a little bent when it arrives but nothing to bad

Bought these for wheels I had bought for my Bmw E90. Didn't think they'd work at first but they solved my vibration issue.

Rings seem durable. They fit on but they slide on easily which means to me that they are not 100%. I was expecting for it to be a little tight fit where I would have to take a little rubber mallet and tap it in. For the price, it’s great. Still slight vibration but a lot better than before. I would still recommend.

Fits without any issues on my Rays 57CR wheels on a 2020 Toyota Supra. Will work with any other car that uses a 66.6 mm bore (e.g. newer BMW, Mercedes, and VW/Audi cars).

Before and after. You can tell the difference when I’m driving. The car doesn’t shake like it did before. May require additional machining to fit properly.

I enjoy that they have precise sizing. It took a folded cloth and a mallet to get into some really cold aluminium wheels, but other than that, they fit perfect. They also will deform enough around the hub so that it makes the fitment into the wheel and hub completely perfect. Not too rigid or too soft. It will scratch, but it will bear the weight. Hope I get a lot of miles on them.