🚚 High-Quality 2 Steel Trailer Light Boxes with 6" LED Oval Tail Lights & 2" LED Red Round Side Lights - Complete with Wire Connectors for Easy Installation Review

Love the lights and boxes. I welded the boxes today and had to do some temporary wiring to use the trailer before I was done. So I connected them and tested the lights, everything was great. Put the jacks in the box and it seemed off. Tried to turn on the light and almost blew up the ship trying to get him inside. Finally inserted, and the top and bottom bushings pressed firmly against the box. Finished my run with compliments on the lights and boxes. When I come back to take her back, the fun…

I've used my trailer for a variety of purposes, but mainly to transport firewood from the forest. I got tired of replacing those plastic lights every time they broke on a rock or log, and sometimes when I hit a tree or branch. They are tough and if one of the lights gets damaged (which I doubt) unplug it from the socket, connect 3 wires and put a new one in. It comes in bare steel so you will need to sand and paint it so be aware of that. The cable passage hole has no grommet so you will need a

Well made taillight assembly. With the appropriate seals, the side and rear lights fit exactly into the pre-punched holes in the boxes. Marker lights were simply inserted into the spacers. The taillights were difficult to install as the long top or bottom spacer kept folding in, especially the first one I assembled. The second was easier to install. There was plenty of room in the steel box for wire connections (I use marine heat shrink butt connectors throughout). I attached the boxes to a…

I have a 20 foot car trailer that has these light boxes installed at the lowest point in the rear of the trailer so they grind over rough road surfaces and have been for years. I ended up breaking one side so badly that I couldn't reinstall the light or socket. I bought these as a spare and am planning to mount them on the outside of the frame instead of underneath. When the boxes arrived I opened them and the fixings and boxes were shipped but the mounting screws were not included. The drawers

The product arrived on time as advertised. Impressive! I don't have the skills or the tools to do it. I had them welded to my trailer frame by a local shop and replaced the normal "ball lights" that were originally installed. However, I did the finer points of lighting and cable installation - which was really good, only the wiring wasn't provided (in length). Combines the necessary connections with the turn signal and brake light to get me out of the box and into the main frame of the trailer.

boxes arrived unassembled lights were protected by plastic bubble wrap which I appreciate the extra care taken during delivery. I mounted mine on the cradle of a gooseneck trailer that basically hauls a tractor and hay equipment that usually blocks the factory taillights. The boxes are stamped 14 gauge, which is strong enough to get the job done, with no frills. There are sharp edges in the light mounting holes that have been broken out, but nothing superfluous, 10 minutes of work with a file…