Pair of Smoke Lens Amber Front LED Turn Signal Light Assemblies for 2007-2017 Jeep Wrangler JK - Fender Flares Eyebrow Indicator Side Maker Parking Lights Bulb Included Review

Grille removed to install new headlights and this. After installing the headlights and opening the box for them, I noticed that one of the plastic mounts didn't feel solid. Sure enough when he put it on the grill it broke! Not wanting to put off reinstalling the grille, I used it anyway. It seems like it's going to stay in place, but it still says it happened. I do not recommend!

I've had mine installed for about a month now! A lot of reviews complain about flickering etc. I didn't use any of the wiring harnesses that came with the bulbs which are actually made to prevent flickering and I've had no problems! Just plug and play and they work great! Thank you now for converting all my headlights to LED! Highly recommended! Pretty easy installation, just need to be patient!

After installation, one of the lamps stopped working. At first I thought maybe I placed the resistor on the wrong wires, but when I opened up the driver's side light I noticed that one of the wires was not connected to the inside of the case. It looks like the solder completely missed the wire during manufacture. I am returning a Revain item and am considering buying a second time due to this quality control issue and see others have had the same issue as well.

Fine. I had to re-glue all the connectors when I received it. General equipment is ok. The socket that the pigtail sits in is very loose and the solder joints inside are not insulated at all. I took mine apart, sealed all the connections with super glue, and quickly reassembled everything. Work after receipt - free installation - cheaply made and not symmetrical. Update: It's been less than a year and they're barely working. Spend your money on something better

So I ordered it from another company and the driver's side didn't fit properly. So I returned them. Ordered from this company and such. The driver's side does not fit properly. You can get it, but it's not really true. I have a Rubicon 2016. They also make Hyperflash! You get resistors to connect. FYI, black is ground, center is chase, and farthest from black is tack. Update: I had a problem with a right and a resistance. I have contacted the seller. They sent me a new set. Would have given 5…

So the problem is that the notches on the right lens are not in the correct position. You'll notice that the Factor RH lens has a "big" cut on the right side. This one has it below. This causes the common wiring harness to protrude downwards, which puts a lot of stress on the wires compared to the drain. The left side is fine and cut at right angles. I'm concerned that this will loosen over time as the wires are pulled on it. Another note: the lenses protrude significantly more than the…

I was skeptical about these at first. I didn't want to bother with connecting resistors to get rid of the dreaded hyperflash problem. But price wise, I decided to give them a try since the others I looked at cost close to $200. Upon receipt I was impressed with their overall build quality and appearance. I decided to try them without resistors (they were in the box) as a direct connection. They also fit perfectly. No fit issues. To my pleasant surprise, they worked the first time too and have…

Easy install except I need terminators on my 2008 JKU Rubicon. Disconnect the wiring, remove the bulb from the existing turn signal and press the notch on the two tabs and slide the existing turn signal through the front of the grille. You may have to press and squeeze the tab on one second and then press for a little while while continuing to pressurize the signal. That was the easy part. Not a lot of room for wiring, but more if you turn the wheel to make room. The pull up resistor goes from…