🔧 Enhance Lifting Safety with Swpeet 4 Pack Sparta Floor Jack Pad Adapter – Universal 2-4 Ton Rubber Rail Pinch Welds Protector Review

Ideal for today's one-piece vehicles, protects welds when vehicle is jacked up. Jackstand covers can be a little uncomfortable depending on the exact shape and size of your jackstands. The whole kit worked great with my 20 year old jack and stands.

I mean they shouldn't be kept indoors at all! Seriously here. I keep them in the shed in the plastic bags they came in and have for weeks. Still very strong. Huge chemical smell. If you can smell it, pick it up. Six months later: the smell is still very strong! They are outside and still smell strong. Wow!

I used these rubber pads on my large jack. I have a 2003 PT Cruiser and the pads match my welds. The pads had trouble raising my car. Shoe diameter 2 15/16 inches. The thickness is 1 3/8 inches. Slot 3/8" wide. Slot depth is 9/16". The jack stands are also perfect for my jack stands. Good quality.

A must have item if you have a good car. I wish I had found them earlier than pads, before removing the primer from a small area under my beautiful car, I had no idea when I started my project that a jack and braces would have caused damage where previous ones had not happened cars. The jack that came with it doesn't fit my small hydraulic jack, but it still works. Jacks are perfect.

I ordered because the set included jack stands and washers. The stand's pads work well but are a bit small. Using a jackpad is not recommended. The diameter is too small and the gap too narrow for VW welds. You have to stack both jack pads on the jack to scratch the metal and then the pads will shrink too much and break. I held my breath to hold them in place long enough to put the jacks under the car.

Seriously, how do you jack up a solid car without damaging the weld? I always use marked nest sites and it always hurts. I was fed up with it and finally got this adapter kit. I kick myself for not doing this sooner! However I would say the washer adapter probably wouldn't fit on a 1-1.5 ton jack, they have a fairly small footprint. I have a 3 ton jack and the pad cup is big enough for the washer adapter to fit in so it doesn't slip out anywhere. Used several times, no cracks or damage to pad…

The first complaint. These items are made of a fairly durable material, similar to hard rubber. They are packed in a ziplock bag. The smell from them is really strong and unpleasant. I can't describe it very well, but very poignant. I tried washing them in soapy water hoping to reduce or eliminate the smell but that didn't work. Maybe it reduced the smell a bit but still very bad. Also, the "cup" diameter of my bushing is slightly smaller than those slotted washers. So he didn't get in, but sat

The jack washer is too thick. This makes it difficult to place the jack under the axle due to the thickness. The circumference of the washer is too large for a medium or small jack, the washer is enough if you have a large or large size! Jack. There are no grip grooves in the base to keep the puck in place. In my opinion, this makes the puck unsafe to use. You can refer to the photos I took to show what I had to do to keep the washing machine in place and make it safer and more useful. I used a