Synthetic engine oil LUBEX PRIMUS EC 10W-40, 1 l, 1 kg, 1 piece Review

UBEX PRIMUS EC 1 high performance engine oil product description Synthetic engine oil with high provides performance characteristics superior protection and cleaning in harsh environments driving. Suitable for use in petrol and diesel engines of passenger cars and light commercial transport. use / scope Suitable for use in petrol and diesel passenger car and light commercial engines transport. Can be used without problems in all modern injection engines of cars, in turbocharged engines and multi-valve engines. benefits / efficiency • Provides permanent lubrication in all climatic and road conditions. Therefore suitable for safe use at any time of the year. • Ensures low oil consumption thanks to unrivaled viscosity control. • Protects the engine from corrosion and wear. • Thanks to special additives in its composition prevents the accumulation of ash and deposits in engine. Maintaining the cleanliness of critical engine parts, increases efficiency and extends the life his service. • In any climatic conditions and at any temperature forms a strong oil film on engine parts and provides a minimum level of wear that occurs when first start and engine warm-up. specifications / approvals API SL/CF storage conditions Provide protection from direct sunlight and atmospheric precipitation. The packaging should be kept closed, under a canopy or indoors. Temperature storage should be within (+5)-(+40)°C. health protection & security measures security Based on available information, the product is not expected to has an adverse effect on health person when used in the intended place and in certain conditions. Used product cannot be incinerate, do not pour into the soil or sewerage. Waste oils should be classified into in accordance with the Decree on the control of spent oils and dispose of through licensed enterprises according to the categories defined in this resolution. See Passport if necessary material safety. technical data typical values ​​test method Viscosity grade SAE 10W-40 − Density 15°C, g/cm3 ) 0.897 ASTM D 4052 Kinematic viscosity (100°C, cSt) 14.55 ASTM D 445 Viscosity index 150 ASTM D 2270 Flash point (°C) 220 ASTM D 92 Pour point (°C) -30 ASTM D 97 Base Number (TBN) (mg KOH/g) 6.7 ASTM D 2896 Carbon capture and storage (CCS) (-25°C, cP) 5900 ASTM D 5293