Technologies 200Mm Cooling Sleeved RF FZ20S W1 Review

Well after owning it for almost a year I found that it was sent to me without a clip c. I had it as a top exhaust fan and at certain speeds it started hitting the case so I kept it low and used shims. Well, I'll change the toilet settings and inspect the fan. He pulled the fan blades and the shaft came out. I will try to refund or exchange lol. I still love these fans, poor quality control from NZXT. Move a lot of air and super quiet. Lots of attachment points.

It fits in the front slot of my Corsair Graphite 600T Arctic White case and looks, sounds and works great. I can feel a lot of air being pushed out and all I hear is the faint whisper of a fan. The green LEDs work well with the green of my 120mm Cooler Master SickleFlow fans located on the top of the case. nice fan replacement for your Graphite 600T case: you need to slide the drive bays back into the case to accommodate this fan (or any other 200mm fan). And it won't go up at all.

NOT suitable for NZXT Phantom housing. In this case NZXT is using some stupid custom size for 200mm fans and they don't make those fans anymore. So if you're trying to add 200mm fans to a Phantom case then you're pretty much SOL. I guess it's my fault for not reading the reviews and assuming that when NZXT says "this is where a 200mm fan goes" they mean that a 200mm fan can fit in there , especially if it's from NZXT. Fan rating doesn't, and as a fan it works very well. With some effort, I…

Was placed as a front air intake on the NZXT Source 530 in hopes of reducing overall noise levels. Airflow is about the same as the two 140s it replaced and noise is moderately reduced, although I have to keep it at 50% (450 rpm) - the higher it gets, the louder it gets in my case . Unfortunately the NZXT came with a sleeve bearing, but this is a budget fan and you get what you pay for.

I was a bit skeptical about purchasing these fans as they got 3 stars right off the bat. But once you read the reviews carefully, you will find that all the reviews are about compatibility issues, all related to size. For those wondering, the fans are actually 200mm, meaning they're slightly larger, and their new 154mm size standard makes them compatible with the Phantom 530, 630, 820 and their upcoming NZXT cases. If your NZXT case was manufactured before 2013, the fans will not work. That…

The fans work very well and comes with all the accessories to connect them. They seem to be moving a lot of air and the blue LEDs are quite bright, even more so than the blue LED fan that came with my case from the factory. These fans will not fit the NZXT Phantom case as the hole spacing does not match the door or top dots). The fans needed should be 193mm hole spacing (still a 200mm fan) but I couldn't find them. I knew all this before I ordered them, so it's not a problem. I ordered them and

I use 2 of these from a power bank for my car camping setup to provide ventilation. They move a lot of air while also being cheaper, much quieter and much more energy efficient than RV style fans. They came with a Molex adapter cable and a switch for LED bulbs, which was great for my non-PC use case.