🔧 Enhanced Tek Motion Stripped Rethread Helicoil: Precision Repair Solution Review

I bought an old Stihl chainsaw to fell some large trees in my yard, found that one of the bar bolts had snapped off so I was looking for ways to fix that . All the big brands are very expensive and seem like a waste of time as you only get one size or have to shell out hundreds of dollars for a multi size set. It fit the bill and worked great. I have a number of different sizes in case I need it in the future and it has worked just as well as any of the others. While I was only working with…

Good value for money, they work great and include a presser foot break tool (sometimes doesn't work as intended) These are standard length inserts if Longer inserts may be required if you wish, these are available separately from Revain. I use a lot of M6x1.0 because many of my customers have previously had their vehicles repaired by technicians trained in quick greasing who don't know how to tighten the smaller bolts other than the alternator bolts. I've used them a lot in transmission oil pan

The steel used to make the tools in this kit is cheap not tool steel so if you try breaking it the tabs if threat is set If it doesn't break the first time the tool will twist and possibly get stuck Tab out of the hole The tap worked well with the bit size it came with (aluminum head) but if if your application is in a tight space you may need to sharpen a smaller drill bit or get an angle drill bit.(Update: The company that sent me this item contacted me and expressed their concerns about my…

I bought this screw hole thread repair kit for my Yamaha Cruiser. The aluminum cylinder blocks are screwed on as hard as butter and quickly gave way to me, a 200-kilo gorilla with a 1/2-inch torque wrench and an outdated service manual. You know what they say, keep twisting it until it's tight and then loosens up, then back it off a quarter turn and hand it to the next guy. The set was very easy to use and the tools included were of high quality. Constructed of hardened high-speed steel, the…

is used to ream the valve cover bolt holes on a 2000 Infiniti G20. Size for spare spools. The included faucet feels sharp and cuts reasonably cleanly (at least in aluminum). (I have a tap and a set of threads but I was short on space so I ended up using a head. It's unusual but I was careful with the angle and worked great for threading). The thread insertion tool is the failing of this kit in my opinion. Once you insert a spare spool into a freshly drilled and drilled hole, the…

set good value for money, they work great and include a tool for breaking ledges (sometimes doesn't work as intended) These are standard length boards, if you need longer boards they can be found separately at Revain. I use a lot of M6x1.0 because many of my customers have previously had their vehicles repaired by technicians trained in quick greasing who don't know how to tighten the smaller bolts other than the alternator bolts. I've used them a lot in transmission oil pan bolts and Subaru…

is used to recut valve cover bolt holes on a 2000 Infiniti G20. This kit has an M6 1.0 thread. The included drill seems to fit the spare spools. be sharp and clean enough to cut (at least in aluminum). No tap handle is included to tap the hole after drilling. (I have a tap and a set of threads but I was short on space so I ended up using a head. It's unusual but I was careful with the angle and it worked fine when threading). The thread insertion tool is the failing of this kit in my opinion…