Top-Rated Thermal Grizzly Kryonaut Extreme WäRmeleitpaste: Ultimate Heat Conductivity for Superior Performance Review

Honest appraisal of this item.I anointed it with 2080s, the temperature of the hot spot dropped from 105 to 82, and the fan speed also dropped

My personal user perspective.I anointed it with 2080s, the temperature of the hot spot dropped from 105 to 82, and the fan speed also dropped

The thermal paste arrived in a timely manner. I use for Core i9-11900 under LSS NZXT Kraken X73 RGB. maintains a temperature that is below 68 degrees even when the processor is operating under load conditions such as 8K or stress tests.

I decided to change the thermal interface on the video card, but the efficiency is at the mx-4 level with a similar application.

I decided to change the thermal interface on the video card, but the efficiency is at the mx-4 level with a similar application.

Pasta took purely out of interest. I do not claim expert opinion. I did everything for myself on two home PCs that I use every day, they are without any overclocking. Actually about configs: 1. Open bench, b660i, i5 12400f + Noctua NH-L9i, 32 RAM, RTX 3060ti. As a result, the temperature fell by an average of 4-6 degrees for all cores. The paste was originally the one that came out of the box. After about an hour of playing RDR2 at 4k, the CPU warmed up to 65-67 degrees at about 1300-1500 rpm…

Thermal paste arrived quickly. I use for Core i9-11900 under LSS NZXT Kraken X73 RGB. cools and prevents the processor from flying above 68 degrees under load at 8K or stress tests.

Has pros: The temperature dropped by 5 degrees, compared to other thermal pastes Has some cons: Nozzles for smearing thermal paste along the diameter of the mount did not fit

Initially set a difficult task. Cool 13600K with Dark Rock Slim be quiet. All experts insisted that this would not work and it was necessary to put dropsy. But everything worked out. Good thermal paste, a ventilated case and the correct motherboard settings did the trick. The temperatures are not ideal, but I was satisfied. Idle 32-35 (depending on room temperature), cyberpunk ultra 50-55, stress test 80-83 without throttling

almost none in the tube, i think mine came out half empty because it was halfway down the tube before anything came out and i noticed an increase of 5 cents temperature, maybe not enough paste on the chip, the temperature went from 80c to 85c while playing on my 5900x with my NH-D15 cooler. should have just switched to N1-H2, I had that before and it worked great.

27 degrees lower than the random paste I used before! 10900K with Prime95 I once took out my CPU to replace the motherboard but ran out of thermal paste so I used leftover paste from a random TT AIO: it's 45 idle, 75 full game. I'm definitely not happy. since I had about 35 downtimes before (with MX-4). Especially when running Prime95, the CPU pack runs over 100°C and hits its overheating limit! That's why I bought this. Once applied, it works with Prime95 at a stable 73°C. God this is so good.

I have an Alienware R17R4 with 1080, decent GPU but not in a laptop, it heats up to 90 degrees under heavy use. One of my research areas is deep learning, which requires a good GPU to train a model. This wasn't possible on my laptop because the laptop went to 90 degrees immediately as soon as I ran the tutorial script and a minute later it just crashed and showed the blue screen of death (once I had to reinstall windows because it was one of the following caused the Windows boot files). I'm…

Thermal Grizzly Kryonaut Extreme for $29.99! That's the price I paid for it. It definitely improved my CPU temperatures, which is highly recommended for Ryzen 9 3900X with AORUS 360mm AIO liquid cooler. With my Cooler & Kryonaut Extreme combo, my standby temp is stable at 31-34C, while under load, playing Destiny 2 1080p 120FPS on a 144Hz monitor, it never surpassed 45C. Definitely recommended if you want the lowest temperature available. If you connected this to the X570 master motherboard…

It works very well, but even at twice the price of the similar Kingpin KPx, they have either greed or incompetence to significantly cut back on them in quantity, bringing it closer to 4x the cost of KPx without literally with no benefits or performance gains. I bought this 2g tube for my Threadripper, a large cube, to ensure it took about 1.3g of TIM to cover it. I push the plunger and it goes halfway down before anything comes out and is empty before I cover everything. I couldn't believe it…

Waste of money. I used this to replace some Noctua thermal paste and my temps went up 2-4 degrees Celsius. It's more expensive than unicorn blood or printer ink. This container is tiny and a big rip off. You just have to make a CPU and that's it! Don't expect anything supernatural.

Wow! My Acer Nitro 5 clocked up to 70 idle and 90 in games. Now I idle 35 to 45. A combination of thermal silicone pads, laptop cooler and THERMAL GRIZZLY to top it all off. I have used the Mx4 and it was ok for the price but I still had high temperatures and I saw all these great reviews on the Thermal Grizzly and was even tempted to get liquid metal but I declined because I am holy that I will spoil everything. Man I'm impressed! My fans have never "turned off" because the computer was too…