One of the best termuh on the market, and that says it all. The consistency is more turquoise, and mx-4 is gray. To take or not to take the fifth - it's up to you, it has a composition, consistency, perhaps better, and it does an excellent job of cooling the processors. An old hp pavilion dv6-6000 warmed up like a stove and puffed like a locomotive, after mx-5 it works quietly and calmly. Yes, and it is easy to apply, unlike the more expensive thermal grizzly cryonaut, which, moreover, holds…

I changed it in a laptop, applied it to percent and VC, thermal pads of the same company (blue). After the first hours of the game, the laptop went down and got cold by -5 degrees. A syringe is enough for a couple more laptops.

Different pros: Excellent thermopsis. Handles temperature very well. In stress tests - core i3 10105f is not higher than 45 degrees. Definitely recommend to buy With its cons: I smeared it once, and the whole tube will lie until next year (

Its pros: Quality, all the same Arctic, good thermal conductivity, on AMD Ryzen 5 3600 under overclocking, the temperature dropped by 10 degrees with a twin-screw tower Has cons: First, the liquid comes out of the syringe, so take a napkin and the paste is very thick, it is difficult to spread

the paste inside the syringe somehow dried up in layers, between them there was a brownish liquid. it turns out chewing gum on the outside, which cannot be smeared on the site, then slurry, which also cannot be smeared. It seems that the storage conditions are violated, although the paste is within the expiration date. I'm waiting for feedback from Arctic, because such an advertised product is sold for a lot of money, and a thing is sent, well, it never corresponds to the quality

Has pros: - Price - Cools the i5 11600KF when overclocked to 60 degrees paired with a budget dropsy Deepcool Gammaxx L240 Different cons: - When applied, it was at first watery, then normal - It is hard to smear, as if chewing gum from clothes

Used the paste almost a month after purchase. I planned to replace the thermal paste immediately on the PC processor, in the video card and two laptops, usually 4gr for this for the eyes. But fig. I disassembled the PC, removed the cooler, wiped off the old paste, started applying this . but it is dry. completely. Since there was no other thermal paste in the house, I had to smear this one. It barely squeezed out, and in the end it gave out such an air bubble. One of these days I'll go buy…

With its pros: I have no idea how it will keep the temperature since it came defective  Cons below: A very thick paste came with a huge amount of some kind of liquid. Obviously from a defective batch that was withdrawn, but we are still selling

The paste smears like chewing gum, you need to get used to it if you like to cover the entire area of ​​\u200b\u200bthe crystal 1d1. A week after application, the maximum temperature of the video card increased from 62 to 66, which raises questions about the quality of the thermal paste, given the large number of negative reviews for the product. Its pros: + Blade included. + The temperature after application dropped by 11 degrees compared to Chinese counterparts. Cons: consistency is…

Terrible thermal paste! It's just not possible to use it. She is wildly sticky, very viscous. It’s like applying paint that was left in an open can and it is in a state between liquid and already drying. Like chewing gum. sticks more to the blade in the kit than to the processor. Sometimes a straight piece comes off the processor leaving it clean. Complete crap. Working with such a paste is unrealistic. Complete disappointment, and I bought another 8 grams . The first impression was like it…

What a double impression of the use. I must say right away that after the native thermal paste on the dropsy GamerStorm Captain 240X White there is no difference from the word at all. On my case, on all coolers, certain speeds are set to achieve maximum silence. Processor i7 7700k scalped. In idle time on the old thermal paste, which has already served 4 years (!) 39 degrees. Under load in Prime95 gives out 83 degrees. We put the highly praised MX-5. Simple 37-38, under load 83-84. In fact, I…

The paste should be used in small quantities. Less than half a tube at a time and then spread thoroughly. No matter how strange it may sound, it is better to do this with your finger, and not with a spatula / brush. Be sensible, don't look at reviews where people pour out the whole tube at once, and write that after that they have too liquid/spill on other parts of the PC.