Timken SET10 Bearing Set Review

Fits all Frontier models with manual transmission and V6 engine as they all must have M226 rear. If you're not sure, join Clubfrontier dot org and see what you have. Dealer wanted twice as much. Note that the seal I received from Napa Amazon part number NOS 45600 had Timken 710356 which they said would work but not even close.

I installed a couple of these on the rear axles of a 2004 Nissan Titan 2wd. Fits perfectly. No problems for 5 months after installation. You need an inexpensive press from Harbor Freight. It was cheaper for me to buy a press, install the bearings, and then sell it on Craigslist than pay the shop to press the bearings for me. I decided to leave the press for future repairs.

This is an exact replacement for a 2004 Nissan Titan axle box (same brand as OEM). for less than half the price. Please note that this bearing includes a press-on washer required for the nitan-titanium axle. You will also need a REAL Nissan Axle Seal (available from Revain for $25). Don't reuse your old one. and usually it is not the bearing that is the problem, the seal is leaking, you just have to destroy the bearing and seal when removing it.

I bought this for my 2004 Nissan Titan 4WD as the rear axle seal needed replacing and the Nissan Titan axle needs replacing the bearing when replacing the seal substitute. This Timken SET10 (Set 10) Bearing Kit came with a bearing and a spacer. If you are doing the same work on a Nissan Titan as me you will also need to order a rear axle oil seal separately. I also recommend new parking brake pads and service brake pads as they are likely soaked in oil and cannot be cleaned/won't work properly.

They were much better than the Chinese bearings I replaced with these. The bearings I had before were from Car Quest. The Car Quest bearings were made in China and have been on my Jeep for about 2 months. One day I noticed an oil leak on the passenger bike. As it turned out, the bearing bracket broke and the axle shaft came out. If it weren't for the fact that I had disc brakes and calipers preventing the shaft from coming out, I would have had a much bigger problem. The brackets that come with