Spotless Car Washing System: Unger Rinse 'n' Go with Deionization Filter - Your Solution for a Flawless Finish! Review

Mr Clea. came out with a product a few years ago that worked pretty well. This product is fantastic. You should be aware that if you try to apply a large amount of high-pressure water, you will lose the purpose of the product. Filters need time at lower pressure to do their job. This is a rinse aid, not a detergent. Some of the reviews are wrong due to abuse. There was one that was spot on in terms of lower pressure.

One of the most difficult and tedious tasks when washing a motorcycle is removing water stains. No longer! It's awesome! All I had to do was wash the bucket and then rinse with it. That's all. I specifically tested it on a terribly hot day in direct sunlight. Dries in minutes and not a single damn water stain. No! It comes with a hardness sensor and I tested our water here in Southern California. The counter has increased above the maximum number in the attached table. I checked the water from…

I like to have a clean and shiny car, but I often put off car washes because I don't like drying myself with a towel after washing and rinsing. When I saw that this would give me a spot-free machine without a towel dryer, I was thrilled. And I have to say, Rinse n Go works! This not only saves effort, but also time. It's pretty easy to set up and get started right away. . I used a TDS meter (it's pretty handy and a great way to track your resin) to make sure everything was working and I was…

I'm skeptical of product claims but this item actually works! It gave spot free results and I didn't have to towel dry my car. I was also able to get the exact look I wanted without breaking my back. I usually lean over the hood and stretch as far as I can to fix the roof, but I couldn't do it with Rinse N Go. This not only saved me time and effort, but also saved me money. This system is reasonably priced compared to similar products and has saved me a lot of money on a trip to the car wash…

Tried 2 washes with this system. For the first wash I used my own hose as the water source as the hose that came with it wasn't long enough. I have also used the system to prewash, soap and rinse my car. I tested the water quality several times with the included TDS meter and got readings between 0 and 12ppm. At these values, I was led to believe that spots would not appear. I let the car air dry and the stains appeared. After some more research, I found that when using my own hose as the water

I have used this device 3 times and it is very effective in washing cars with no stains. I have very hard water in my area and even after adding a softening system that still doesn't remove solids from the water this has been a great addition. From what I've read it doesn't last too many washes before you need to change the resin. So don't use it during the actual car wash, only for the final rinse (and make sure you only turn on the nozzle half with low water pressure so it has enough time to…

I have finished my first two washes with Unger Rinse 'n' Go and am VERY happy with the results so far. The device exceeded my expectations. There are a few tricks to make it work perfectly, so be sure to read the instructions. I'm washing a large truck, so my job often involves keeping the entire truck wet during the wash to prevent stains from forming. And then when I stop washing, it's a race to reach all the glass on the sunroof and windows before the horrible stains appear. water stains…