Water cooling system for ID-COOLING FROSTFLOW X 240 processor, black Review

good CBO, of course, I don’t know its service life, but I think that for 3100 it simply has no alternatives. He doesn't drink champagne!

I needed it for an engineering study on the cooling of a huge Peltier element, so I took it with me. He does admirably in his assigned duties. About a month has passed during which time it has operated continuously, and the pump has not failed as of yet.

Dropsy for 3500 by 240mm, what could be better? ) Good installation kit. The tubes are pressed. You can conveniently rotate the pump to reduce the load on the tubes. On i5 9600kf idle 30 degrees. Coolers do not make noise, the pump is not audible at all. All in all, a great purchase for the money!

Cool cooling minus 10-20C⁰ from the processor in games above 45-50C⁰ does not rise before that it was 65-70C⁰ Processor 10 cores 20 threads 125w (it seems)

Sharing my firsthand perspective.With its pros: Processor temperature, enough to cool an 8-core good Cons below: One of the fans started to act up, it makes a lot of noise.

An objective analysis of the item.The first dropsy in my life! Previously, the tower was straining to cool the processor, but now it's quiet

I took it for an engineering project, it is on the cooling of a large Peltier element. He copes with his task perfectly. It has been working non-stop for about a month and so far the pump has not died) With its pros: - Dissipates heat well. - Nice white pump illumination. - Availability of all possible fasteners. - 2 large quiet fans. Cons: Flimsy heatsink metal and weak threads: with a little effort, it easily breaks off. Pretty tight hoses.

It took me 15 minutes to install it, and when it was done, the idle temperature of the i5-10400f was 30, and the fans were spinning at 600-650 RPM. During the stress test that I ran for a half an hour, the temperature never went higher than 52 degrees, and the fan speed ranged from 800 to 830. At this speed, the system does not produce any audible noise. The temperature was reduced by four degrees as the video card started to feel less constrained, in addition to the fact that the device looks…

As a whole. I purchased the e5-2680v1 for cooling because I was itching to use the computer. It functions after it is turned on. I believe I should adjust the fluid so that it will work effectively and long-term. Oh, how concise it is and how much enjoyment it brings. how much do we know now, though. There is silt in the turbid liquid. I didn't regret the fact that my car still smells like coolant. Once the fastening seal has been cut, it may be easily and securely installed on huanan. I…

Used for the AMD Ryzen 5 3600X, for which the tower cooling failed to maintain temperatures below 80 degrees during the AIDA64 benchmark. Case Cougar Volant, it features locations for attaching two 12 cm coolers on the top cover, thus I foolishly assumed that setting up this CBO would be a breeze. What a fool I have been)) Technical know-how, a decorative grille on the VAZ radiator, and other equipment helped me install it on the building's second-story roof. Due to the poor thermal…

It cost me $3K to purchase it in the 20th year, which was the going rate for a decent tower at the time. I desired an attractive PC. Moderate loads, almost constant use, and 50% idle time. The cooling quality has dropped to an entirely unacceptable level during the past year! Specifically: Ryzen 5 2600 at 3.7GHz, 1.2V in the stress test, and a temperature range of 86 to 90 degrees on average. No dust, a fresh MX-4, and a temperature of 23 degrees inside. I disassembled it before the warranty…

Liked the low cost and positive feedback a lot. In reality, the system is chaotic. To put it plainly, it was not made to work continuously under any kind of reasonable pressure. For multiple days, my CPU can sustain full speed. These images are conceptual and not a "stress test." And for a couple of months, this cooling system functioned normally under those conditions. The pump then began to wheeze. Obviously, it needs to be updated to something more appropriate.

stopped working normally after 1.5 years. it continues to work on external signs, but the temperature of the processor reaches 90-100 degrees. and heard crackling inside. Also, in the process of work, a crackling was sometimes heard and it was as if the pump was starting, but at the same time the computer was slowing down for a couple of seconds, it was not pleasant, but it rarely happened. As a result, the processor overheated and began to simply cut off. Replaced cooling with AEROCUL. it is…

7nm do their job, the crystal has become smaller and now it has become more difficult to cool processors of the 3rd, 4th and 5th generation Ruzen, so I don’t advise taking such a cooler for older Ruzen 3 + solutions The fans are noisy, but they have pwm adjustment, the cooling gurgles a little, but this is all the features of the work, for 2750 all this is not scary

All in all. I bought e5-2680v1 for cooling, well, my hands itched to do something with the computer. Turned on, it works. I think, let me change the fluid, so that for sure and for a long time. Oh, how short it sounds and how much fun it adds . but how much knowledge now. The liquid is turbid, with sediment. I did not regret that I stink of coolant from the car. To install on huanan, you need to cut the fastening seal, it is fastened securely, conveniently. During installation, I broke the…

Good SVO. It is on the assembly with the i5 9400f, the temperatures are good. I've been using it for about a month, no problems, no leaks. According to reviews from other sites, most likely in a year you will have to open and descale. I bought it for a good price, 2500 came out, I'm very happy. Perhaps after a while I will add a comment if I run into problems until this happens. In quiet mode, the temperatures are also decent

Used to cool the AMD Ryzen 5 3600X, since none of the tower coolers could cool it below 80 degrees in the AIDA64 stress tests. Case Cougar Volant, it has places for mounting two 12 cm coolers in the top cover and I, naively, thought that there would be no problems with installing this CBO. How wrong I was))) Well, in general, with the help of engineering ingenuity, a decorative grille on the VAZ radiator and tools, I put it on the top cover of the building on the second floor. The thermal paste

I bought it in the 20th year for ~ 3K, i. E. for the price of a good tower in those days. I wanted a cool looking PC. Almost 24/7 usage, moderate loads, half the time idle. For a year, the quality of cooling has decreased to an absolutely unacceptable level! Namely: Ryzen 5 2600 at 3.7GHz, 1.2V in the stress test, an average of 86 degrees with peaks up to 90. Conditions: no dust, MX-4 fresh, 23 degrees indoors. I did not wait for the end of the warranty, I took it apart - see the photo. The…

I installed it in 15 minutes, on the i5-10400f the idle temperature was 30, the fans were spinning at 600-650. I ran a stress test for half an hour, the temperature did not rise above 52, the fans were spinning at 800-830. At this speed, the system is quiet. Well, this thing looks great, plus the video card began to feel freer and lowered the temperature by 4 degrees

Pros: - Ryzen 7 2700 couldn't get above 40º with a single fan, can probably handle without them - good mounting kit - conditionally silent - price Has some cons: I did not find how to turn off the backlight of the pump, because of this, minus a point on the appearance.