Got pros: Paired perfectly with existing smart home devices that were connected to mi home. As a result, I combined everything with the station. Cons below: Do not connect Chinese devices without mihome modifications

If you use only this set, I can hardly imagine a set of scenarios that can be implemented. I bought myself because of motion sensors and a temporary gateway with which they can be controlled and controlled by light bulbs. I didn’t manage to connect more modern sensors, but I’m not very worried, since I plan to implement control of all devices via raspberry pi with homebridge, and abandon the gateway from the kit.

I'm just shocked by the market service. I ordered the goods on February 21, within two weeks they took out my brain with delivery. As a result, they kind of lost my order and are looking for it almost with the police. The brain was powdered, the noodles were hung, in the end I had to refuse the order. And reordering it is one and a half thousand more expensive. And I was left without this product. What kind of attitude to people I did not understand😡😡😡

I bought a kit to try "smart home". Out of the box, the use cases are pretty limited: night light, doorbell, simple alarm, motion detection and/or door/window opening notifications. Taking into account the fact that I already had a couple of Yeelight lamps on my hands (by the way, this is another 3/4 of the cost of this kit), in my case this kit immediately allowed me to organize "smart" lighting: for example, turning on the lamp in the kitchen chandelier (trigger - opening the door) and…

I could not underestimate the rating, because the product itself is good, and with poor optimization should be scolded here. But it's worth cautioning "Smart Homes".

With its pros: Russified, or rather, made already for the 2022. Works flawlessly, everything is clear and accessible. You need to download a special application to your phone. With its cons: Unlike the device made for China, there is no radio, and the number of additional sensors and cameras that can be connected is very limited.

I was hoping to create a smart home based on this set, but I ran into such a problem: many smart devices are not supported in 2022, so they need to be configured within the US or China region. This set works only in 2022, so I had to register under a different account. Those. the sensors themselves can be reset and "married" with another gateway, however, the gateway itself from the set is programmed for the 2022. With smart switches, he generally refused to approach, a search on the…

Has pros: Easy to set up, clear interface in the application, good design Has cons: Poorly compatible with Chinese versions, you need to install a custom application.

With its pros: Russified, or rather, made already for the 2022. Works flawlessly, everything is clear and accessible. You need to download a special application to your phone. Cons: Unlike the device made for China, there is no radio, and the number of additional sensors and cameras that can be connected is very limited.

In general, good. For the money there is nothing to complain about. Only upsets the cost of many other devices from the Xiaomi ecosystem Has pros: The cheapest smart home sensor kit Easily connects to each other and clings to mi home Powered by batteries already inside (except for the hub, it is inserted into the socket) Its cons: Difficult to connect to devices outside MIHome The voice assistant does not correctly see the sensors and some devices connected via the hub

Despite the high quality of the technology itself, the entire system, especially the implementation is still very crude, is far from ideal. With its pros: Base for building, studying, running a smart home system. Gives an understanding of the principle of operation and design of Smart Home systems. For the entry level - just right. Cons below: First: while a small selection of added equipment by default. Second: sometimes notifications on the smartphone come with a delay. Third: the unreliable…

The sensors are compatible with the system for the Chinese market. In general, the purchase is satisfied. Another nuance. Unlike aqara motion sensors, these sensors do not detect the level of illumination. may be useful to someone)

I'll try to fix it now, it looks like the impulse stabilizer on the TNY176 has died, because. after it there is "silence", there are no prescribed 10-13v at the output. I ordered a chip, I'm waiting. Different pros: Easy to set up, a variety of work scenarios, adjustable backlight, alarm mode, doorbell, open door alerts. Together with motion sensors and a light bulb, Yeelight organized night lighting when visiting the toilet, for example. Through the alternative MiHome from vevs, there are no…

The gateway got up normally, I immediately saw it, and the sensors too. The most difficult thing was to understand the logic of the Mi Home software. But it seems that the program is being finished. It is very important to know that if you buy a set for 2022, then in the future you will be tied to this particular region. And so far, very few Xiaomi devices have been adapted for it. The list is expanding, although not quickly.

So, I will briefly describe how to make this whole thing work without Chinese servers with their lags and glitches of MiHome itself. I’ll make a reservation right away, it will be necessary to invest another 3-4 thousand in addition to this set, then everything will rest on your desires and financial capabilities. The hub from the kit is for discarding, instead we need a Raspberry Pi 3B, a memory card, it would be better if the card is of class U3, but U1 will also work. Card capacity from 8Gb.

Some pros: Definitely the best option for those who don't want to think about how to make their smart home, and it's not expensive at all! Its cons: Without crutches it is impossible to connect with Alice

Pros: Cool packaged, high-quality plastic, looks nice, works out of the box, for review it is better not to think of! Cons below: You do not immediately understand the application on a smartphone. You have to dig a little.

Got pros: Just in setup. All sensors are wireless. Mounted on double-sided (there is a spare) adhesive tape. Quality plastic. The sensors are small and hardly noticeable in the interior. Cons below: The base does not support bluetooth devices, and there are no temperature sensors with a ZigBee connection from Xiaomi for sale. This is sad.

Where do our marketers come up with the price and amount of the discount. Sometimes you give a diva. Pros: A great thing if you take for 2022-2500. I don't recommend to anyone else. If you want to get a little soldered - it is perfectly sewn, or rather it is done by a Linux server. Enclosure can be used for sls. Since the kits are old, sometimes you can buy cheaper than the sensors on Ali separately. In the basic configuration, of course, it works, although the functionality is rather weak…

I took it because of the price, if you look at the prices for components separately, it comes out almost for nothing. Some pros: I bought for shares of unprecedented generosity in Amazon (for 1999). The quality, as always, is on top of Xiaomi and its partner companies (I'm talking about phones and smart home). Everything works, immediately picked up in Home Assistant. The gateway communicated immediately in 2022 (by the way, it does not climb into NA, unfortunately), in this set for me…