Header banner
Revain logoHome Page
yamatic horizontal pressure washer pump: 3400 psi @ 2.6 gpm, 3/4" shaft - original engineering for most brand gas engines logo

YAMATIC Horizontal Pressure Washer Pump: 3400 PSI @ 2.6 GPM, 3/4" Shaft - Original Engineering For Most Brand Gas Engines Review

3

·

Excellent

·

$$$$
Revainrating 5 out of 5  
Rating 
5.0
👠 Pumps, 🧹 Cleaning Supplies

View on AmazonView on ЯM

Media

(4)
img 1 attached to YAMATIC Horizontal Pressure Washer Pump: 3400 PSI @ 2.6 GPM, 3/4" Shaft - Original Engineering For Most Brand Gas Engines
img 2 attached to YAMATIC Horizontal Pressure Washer Pump: 3400 PSI @ 2.6 GPM, 3/4" Shaft - Original Engineering For Most Brand Gas Engines
img 3 attached to YAMATIC Horizontal Pressure Washer Pump: 3400 PSI @ 2.6 GPM, 3/4" Shaft - Original Engineering For Most Brand Gas Engines
img 4 attached to YAMATIC Horizontal Pressure Washer Pump: 3400 PSI @ 2.6 GPM, 3/4" Shaft - Original Engineering For Most Brand Gas Engines

Details

BrandYAMATIC
ColorBlack
MaterialAluminum
StyleHorizontal Pump
Item Dimensions LxWxH2 x 2 x 2 inches
Power SourceEngine
See 3 more

Description of YAMATIC Horizontal Pressure Washer Pump: 3400 PSI @ 2.6 GPM, 3/4" Shaft - Original Engineering For Most Brand Gas Engines

【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3400 PSI / 2.6 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2800-3400 PSI and fit most above 212cc 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine. 【Extended Durability& Adjustable Unloader】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, It is manufactured from fully anodized die-cast aluminum for protection against rust, get 200 hrs running time. With adjustable unloader allows you to increase or reduce the pressure to fit the engine's requirement better. 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3400 PSI at 2.6 GPM to wash walls, fences, sidewalks, vehicles, and more.⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!. 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible, Set up in 5-10 minutes!. 【COMPATIBILITY 】Replacement for►Karcher: G3050OH, MH5500H-1, M5500H-2, M5500H-3, G2800OH, G3000OH, G3025OH, G3050OH. ►Simpson: MSH3125, MSH3125-S, MSH3224, MS60921, 90029, 90028,PS60841, MS60763. ►Honda: GC190. ►Delta: DXPW3025, DH3028. ►PowerStroke: UT80522, UT80953, 308418007, 309515003.►Powerboss: 020309, 750143, 020646

Reviews

Global ratings 3
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Perfect fit for my Honda GC 160 pressure washer.

I looked long and hard for a compatible pump replacement that's 7/8th inch shaft, and selected this one, hoping it would fit. It slid right on, bolted together easily and worked with my existing hose and fittings. I connected everything, tightened t four bolts, connected the hoses and everything worked perfectly.The only downside is that there is a gap at the top and sides where water may get in, so I put some high temperature caulking on the top and side gaps, leaving the bottom open for any…

Pros
  • Works Good
Cons
  • May not be suitable for commercial use

Revainrating 5 out of 5

This is a powerful pump.

This pump was easy to install, and the pressure is great, we hadn't realized how weak our original pump had become until we started using this one.

Pros
  • I've only used it twice but so far so good
Cons
  • Noisy operation

Revainrating 5 out of 5

East to install on my review.

Dealer wanted $500 dollars to fix a 2 year old MITM with a Honda motor. 1/5 the price and took ten minutes to install. The washer works better with this one then the original.

Pros
  • Fit my Simpson perfectly and is much more powerful than the original.
Cons
  • Difficult to find compatible nozzles