Fubeasi Chain Breaker Link Splitter Pin Remover Repair Tool - Ideal for Motorcycle, Bike, and ATV Chains Review

This is cheap china for single use if you're not careful, so I was glad to read the reviews before buying and know what to expect when using it. Connection. This article will not be pushed out otherwise. Even with the polished stylus it was still debatable, but it did the job. Second, the punch was already slightly bent at the chain break, requiring the chain to be manipulated so that it was centered on the pin. This article is not often used for me, so I didn't mind. I wouldn't buy one if you…

Pin pushed out the first time but bent because the impact was too hard and the pusher entered the shoulder and started to bend. I loosened it one turn and adjusted it to fit right into the now depressed pin hole and it pushed the chain pin out but the chain breaker pin broke. So I found a nail that is normally used to drive a powder charge into concrete and after cutting off the end of it I managed to push out a few more pins with it but it also bends. It works and might not break if I didn't…

Used to split the 525 chain and should have used it to press the side plate against the main link. Worked very well. The handle on the side could be a bit longer. It's a bit short for my hands. I warn you, DO NOT ATTEMPT TO BREAK THE CHAIN WITHOUT FEEDBACK THE RIVET END OF THE PINS! I bent a good quality chain breaker to break the chain without grinding. It's not the tool's fault, I used two cheat bars. I've successfully broken smaller chains without grinding in the past, but on these larger…

The first use pushed out the pin, but bent because the impact was too strong, and the push rod entered the shoulder and began to bend. I loosened it one turn and adjusted it to fit right into the now depressed pin hole and it pushed the chain pin out but the chain breaker pin broke. So I found a nail that is normally used to drive a powder charge into concrete and after cutting off the end of it I managed to push out a few more pins with it but it also bends. It works and might not break if I…

Used to split the 525 chain and should have used it to press the side plate against the main link. Worked very well. The handle on the side could be a bit longer. It's a bit short for my hands. I warn you, DO NOT ATTEMPT TO BREAK THE CHAIN WITHOUT FEEDBACK THE RIVET END OF THE PINS! I bent a good quality chain breaker to break the chain without grinding. It's not the tool's fault, I used two cheat bars. I've successfully broken smaller chains without grinding in the past, but on these larger…

This is a simple tool and I was sure it would do the job but I read the reviews carefully so I knew I had to replace the upper parts of the chain link should grind. Rivets before attempting to pop one out with this tool. So I took out my Dremel and carved two rivets and then tried to attach the tool but found that the threads in the tool were too thin to withstand the force required to push the rivet out. The carving was almost smooth so the tool was useless. I ended up sanding more with a…