I bought this primarily as extra air storage for my 25 gallon compressor. So I look at the tank itself first, which is pretty good. The manifold, hose and air cartridge included in the kit are not suitable as they restrict flow. By adding a tee in place of the manifold, you can fit a pressure gauge on one end and a quick-release chuck on the other. This allows you to fill the tank in 12 seconds instead of 2-3 minutes with a tire valve on the manifold. It can be safely inflated to a pressure of 150psi (150psi is within the safety parameters for this 125psi pressure rated vessel) and the stem will hold pressure for weeks while losing less than 10psi inches. Too bad they don't come from the factory that way. It's a little harder than I thought it would be, but I doubt anyone would do these hikes. You're much better off with a large capacity that you can use but the added weight than a lightweight unit that doesn't hold enough air. Of course you could use an aluminum tank, but it costs three times as much.
GeilSpace 6 Pack Of 3/4" Γ 8" Black Metal Pipes - Ideal For DIY Industrial Shelving - Fits Standard 3/4" Black Threaded Pipes And Fittings - Vintage Industrial Steel Pipe (Black)
11 Review
Quickun Industrial Grade Plastic PVC Vinyl Tubing, 5/16" ID X 3/8" OD Clear Tube BPA Free Heavy Duty, 10FT
16 Review
Flexaust 231 Plastic Elbow Black: Durable and Efficient Pipe Fitting Solution
11 Review
Good 12674 Rubber 50 Feet 8 Inch
9 Review
Upgrade Your Draft Beer Kegerator With The TerraBloom CO2 Keg Pressure Regulator - Dual Gauge Heavy Duty Unit With Safety Features
16 Review
High-Quality QiiMii Stainless Steel Sanitary Clamp With Silicone Gasket - 2 Inch, Single Pin Tri Clover Design
16 Review
12V Brass Solenoid Valve, 3/4" Electric Air Valve For Water, Air, Gas, Fuel And Oil - Normally Closed By Beduan
10 Review
DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C Normally Closed No Water Pressure
14 Review