Review on Nilight - ZH006 LED Light Bar 20 Inch 126W Spot Flood Combo Off-Road Lights: Reliable Performance with Wiring Harness Kit, 2 Year Warranty by Curtis Castillo

I bought 2 of these 20 inch lightbars for my John Deere 2305 tractor, one with the wiring harness and one without. I installed them on top of the cross member to keep the loader bucket and rear attachment from blocking the light. During the winter months I do most of my snow removal after dark so they are a great help and an improvement over the stock Am supplied Wiring harness was too short so I made a longer one out of 16ga and routed it from the battery under the driver's seat where I connected it to the included wiring harness and shrink tape (need to cut the stock battery). ring connector). The dishes that came with it worked great. I installed the relay under the rear fender where many other factory wires were. The switch wire was long enough to reach the dash and I had an empty spot in the dash that was perfect for installing the switch. I made a wooden bracket so I could mount the lights back to back on top of the roll bar, one in the front and one in the back. The unit is secured with 5/16 inch carriage bolts through the factory holes in the top of the cross member. I covered the wire harness and wiring through the engine compartment with plastic tubing to protect the wires and secured everything with zip ties. I'm very happy with the brightness and the adjustable brackets are great for leveling anything. The build quality seems very good and solid. Hopefully these lights can handle -40°F frost, cold and wet this winter!