I had a CR10 and used the Peopoly print surface I got direct from them which was pretty good but became less effective over time. When I replaced the CR10 with the CR10 I got a different peopoly printable surface but through Revain and it didn't seem to work as well as the one I had before. I eventually got so frustrated with this that I went back to tape and glue stick, but it didn't take long for me to remember why I was trying to find alternatives to this method. So when I was looking for a new print surface solution I came across two that sounded interesting but ultimately decided to give these a try and was glad I did. It was packaged well and was a perfect replacement for the glass plate that came with the printer. I have used this for 5 prints so far and it has worked flawlessly. A few large items, medium-sized items, and a print of 100+ individual small pieces all stayed in place during printing, and once the bed cooled, the pieces came off with little to no effort with my bare hand. It's pretty darn cool that you don't have to use glue to glue the part or later try to scrape the part off the platform with a tool. One thing I don't like is that this printing surface has to cool down to remove the printed part, so it's not possible to quickly remove the finished part and immediately start a new print. The platform must be completely cool before the part can be removed, which means you have to wait for the print surface to warm up again. While I find the cooldown a bit annoying since I no longer have to print the raft, it saves me time overall. I also increased the print surface temperature from my previous preferred temperature of 45 to 55, making it appear as if heat activated. Didn't try to see if it would still successfully hold the part at a lower temperature. Simply put: an amazing 3D printing surface and I definitely recommend it!
Pack Of 5 TMC2208 Stepper Motor Drivers For 3D Printers, DORHEA V1.2 Module With Heat Sink And Screwdriver For RepRap, RAMPS1.4, MKS, Prusa I3, Ender-3 Pro Controller Boards
19 Review
BIGTREETECH SKR Mini E3 V3.0 Control Board + TFT35 E3 V3.0.1 Graphic Smart Display Panel Board New Upgrade 3D Printer Parts For Ender 3, Ender3 Pro, Ender 3 V2
13 Review
BIGTREETECH SKR 3 EZ Control Board 32Bit New Upgrade Silent Board Support EZ2209/ EZ5160/ EZ2130 Stepper Driver Compatible TFT Series Touch Screen, DIY For Most FDM 3D Printer (With 5PCS EZ2209)
7 Review
10Mm X 11Mm Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 For 3D Printer And CNC Machines - 1 Meter Length
7 Review
๐จ๏ธ FLASHFORGE Adventurer: Enhanced 3D Printer with Removable Extruders and Monitoring Features
4 Review
Economic Ender 3D Printer DIY Kit With Resume Printing Function, Large Printable Area Of 220X220X250MM By Creality 3D
18 Review
๐ต IFUN 3D Rapid Resin - Low Odor Photopolymer Resin for 405nm LCD 3D Printer - Fast Curing, Standard Rigid Formula - Sky Blue, 500g
5 Review
UV Curing Standard Photopolymer Printer by IFUN
5 Review