This filament has great potential for beautiful, non-functional prints. I've found it to be significantly more brittle and fragile than normal pla. On the flip side, it looks much better than most pla materials. I've had issues with first-layer adhesion, which were solved with higher first layer temperatures (210C works great for me). It was a nightmare of blobs and strings until I figured out good settings. I'll post the important ones here for prusa slicer / mk3 in case anyone else is struggling:- DISABLE THE FAN. This eliminated 99% of my stringing. Seriously. Turn it all off.- Retraction 1mm length @ 80mm/s helped with most of the blobbing and remaining strings- Disable wipe while retracting. You may want to also disable Lift Z.- Normal print temperature at 190. You can go as low as 185. Do not go lower than 185, adhesion will fail.- Bed temperature at 55. You can print higher temps for first layer for better adhesion. 210 / 60 worked well for me.- YMMV, but I wasn't able to print on the textured sheet. The first layer would always fail. I had to use the smooth sheet for this material. I'm sure I could have used a glue stick or something else, but I don't have access to rubbing alcohol right now due to covid, so I couldn't clean the sheet after printing if I did that. Speaking of, that may also have affected my first layer adhesion, since I can't clean my sheet right now!
🖋️ OVERTURE 3D Pen PLA Filament Refills: Enhance Your Creations with Matte and Silk PLA Options
3 Review
🖨️ Comgrow Printer Filament 1.75mm Spool: High-Quality 3D Printing Material
3 Review
🔮 ELEGOO UV Curing Standard Photopolymer - Washable Formula
3 Review
🔍 Enhanced Precision: OVERTURE Filament Dimensional Accuracy Printers redefining print quality
3 Review
UV Curing Standard Photopolymer Printer by IFUN
5 Review
Economic Ender 3D Printer DIY Kit With Resume Printing Function, Large Printable Area Of 220X220X250MM By Creality 3D
18 Review
🔵 IFUN 3D Rapid Resin - Low Odor Photopolymer Resin for 405nm LCD 3D Printer - Fast Curing, Standard Rigid Formula - Sky Blue, 500g
5 Review
High-Precision And Stable Creality Ender 3 V2 3D Printer With New UI, Silent Mainboard, Effortless Filament Feed-In, XY-Axis Tensioner, Resume Printing, And Large Build Volume Of 220×220×250Mm
11 Review