Review on Shop Fox D3031 18-Inch Full Ext Drawer Slide 100-Pound Capacity Side Mount, Pair by Jeremy Romero

The Shop Fox guides look, operate and install like any of the other big manufacturer full extension slides.That is to say they install easy and work great.The key is to provide the 1/2" space on each side of drawer for the slide. Again same for all manufactures. And also 1/8" space on the top and bottom for drawer clearanceThey provide 12 screws, 3 for each section. The screws are small and I am always concerned they will not hold but I have never had a problem with a drawer coming loose.There several pre drilled holes to add additional screws if you want.Some of the holes are oblong to allow some movement in the final positioning before tightening.There are lots of instructions are measurements and using a level etc to install the guides, but I found that make a couple wood blocks of exact same length and using those to locate the guides and mark the holes to drill works best and is fast (see picture).The first push of the drawer seems to be hard but after the drawer is pushed all the way in it them moves back and for very easily and most importantly extracts to the full length of the drawer to be able to get into the back of it.