Review on 🔥 Aramox Precision Spark Plug Gap Tool, 14mm Billet Aluminum Car Spark Plug Gap Tool Caliper for Sparkplug Gapping by Paul Ziegler

The screw that presses on the spark plug rod is not smooth and cuts into the rod a bit at the spark plug gap. This is easily solved by placing a flat piece of metal (such as a washer) between the end cap yoke and the bolt in the tool. Also, the threads for the fork aren't quite straight, but that didn't really matter when I started using a washer between the fork clamp and the adjuster bolt. Not a perfect solution, but a great option if you don't want to spend more than $100 on fancy connector gaps. Also, a little tip for the user: the connector band springs back a little when you snap it into place. For example, I wanted .028 on my connectors, but I had to use .020 probes and rotate the tape until it touches the electrode probes. Then the band springs exactly to 0.028. All in all a great product. I just wish the screw had a smooth finish and the plug threads were straight. I will continue to use this and recommend it to anyone looking for a cheap splitting tool. After making a few corks I was able to burn through the rest of the corks and get very consistent results!