Review on 🚿 DANCO Mobile Home RV Tub Shower Center-Set Faucet: 8 inch, 2-Handle, Chrome with Clear Acrylic Handles - Premium Quality for Your Recreational Vehicle by Craig Kumar

This is a good value. The $10 saved at the store made it look way better than regular faucets. I didn't have to spend a day traveling to the city. It's plastic, which I wasn't expecting (I guess I didn't read enough). Looks great, works great, very easy and quick to assemble. Would definitely recommend to people. Install the Beginner's Aid Use the black plastic gasket, making sure the tab on the inside of the gasket rests against the faucet itself. There is a ledge that the faucet sits on and lean it against the wall. Simply press the seal against the shower screen. Insert the faucet into the shower screen so that the holes match, hot water flows into the left side hole and cold water flows into the right side hole. (From the inside of the shower) go around the back of the shower wall, screw the black nuts onto the back of the faucet so they hold tight to the wall, always add masking tape on the faucet pipes. (Total 3 white big screws should be 3) After adding the tape, screw the PE pipe fitting into the faucet, COLD (blue) is on the left side, HOT (red) is on the right side (seen from the back). tap) the shower is screwed to the middle white plumbing. Make sure everything is sealed before turning on the water. Values included, supply lines well sealed, no transverse threads (crooked). Be sure to check the shower wall behind your new faucet to make sure the black gasket is tight against the wall. Turn on the water and check for leaks. Make sure all air is bled off before turning off the levels on the faucets. You want NO drips and everything works fine. If you have drips, make sure they are well covered with tape and each adjustment knob is tight and straight. If the leak is still leaking, a gasket in the cold water lines may need to be replaced or added. Hope this helps someone else I might just be wasting my time.