Adjustable Handheld Shower Bracket With Brushed Brass/Gold Finish - No Drill Installation Required Review

My husband is 92 years old and he needs to sit down to shower. I replaced our standard shower head with a "6 Functions Handheld Shower Head Set Hopopro High Pressure Shower Head High Flow Hand Held Showerhead Set with 59 Inch Hose Bracket Teflon Tape Rubber Washers" purchased from ebay. It's really nice but it was mounted too high for us to easily reach it making it less than what we wanted. I decided to look for a bracket that would allow us to mount it lower down on the shower wall. This one…

I liked the first one I installed last year so much I purchased this one for a second bathroom. Easy to install just let the adhesive set and I just hold it in place with painters tape overnight till the glue sets and it holds on great. The brass finish matches my hardware perfectly and looks like it is original hardware.

I've had this in my shower just over a year. Six months after installation the holder began to slowly droop so that the wand pointed at the floor. That would take a few hours. Now, a year after the install, the wand droops and points toward the floor within about three minutes. I'm constantly having to readjust where it points during a shower. And because of the (unfortunately) very high quality glue, and the fact that I mounted it on my fiberglass shower, there's no removing it (without…

i was very impressed with this product. it came with actual tube of waterproof glue, not just a piece of sticky tape. has been on the shower for months now and has not moved. I installed this in my brothers shower and he is handicapped and didn't want to worry about it falling off with the shower handle on it and hitting him, so didn't trust a suction one or adhesive tape, this was the perfect answer!

Is the tube of glue SUPPOSED to be so hard to squeeze out? Or did I receive a defective tube of glue that had started to dry out?It was like trying to squeeze chewing gum out of a sample-size travel-size toothpaste tube! I could not get it to come out easily. Eventually I gave up and cut off other end of the tube and used a screwdriver to apply the "putty" glue.It's attached and drying now. I guess we'll know more in 48 hours. But I honestly think that my glue had already started to dry out and

Be aware that this is a permanent holder that has to be glued/cemented to the shower so it can't be removed or adjusted. That's my review!

It's easy to attach with included glue and it is stuck strong. All metal construction gives luxurious look and feel. It's compact size blends well in the shower booth. Compared with suction based ones I replace, this one looks and works hundreds times better.

Heavy steel construction works perfectly and adhesive was easy to apply. Been on the shower wall for a few months and seems like it will stay

This was very easy to install. I followed the instructions and haven't had any issues. It definitely needs the 48hrs recommended for the glue to cure properly. The sticker was great to keep the hook in place while the glue dried. Otherwise due to the weight of the hook, without the sticker, the hook will slide down until the glue properly cures. Be sure to remove excess glue around hook before applying sticker. Otherwise, you will have parts of the sticker stuck to your wall when you remove…

Came with everything I needed. I did put in some extra tape to hold it in place until the cement cured. Later I removed and cleaned everything and the finished look is fantastic. After 6 months of use, we have had no problems. Fixtures are all brass. So this looks fine along with the other fixtures in the bathroom.

So far so good on this product. It did drop once during install but as long as you follow the instructions, you should have no problems.Of course its only been a couple weeks so , ill update on longevity if it ever falls offProTip(Not really) : I used painters tape along with the provided sticker , this was to make sure that the adhesive never touched any water during the curing period. I gave it full 48 hours and some change before removing the tape and adhesive.*Update 4/16/2021It didnt fall…

Heavy duty quality. Installed with adhesive in a camper. Even bouncing down the road this holds in place. We will see how it holds up after the camper sits in the cold for the winter. Not sure the adhesive will remain as durable. The ball pivot is hard to adjust.

I wanted to be able to have a lower spot for my shower head. I first bout one that works by suction and returned it. This one comes with an adhesive glue that you leave over night. So, you can't shower for that day. But once it is done it stays in place. That is much better than a suction cup one that eventually falls.

2 stars because the concept is good. I WANTED this to work. Would have been great, but the "adjustable" bit is set at a crooked angle - leaning right - and will not budge from that position. Returning it, despite the hassle of having to pay someone to run errands for me, because this company does not deserve my money. It doesn't deserve yours either.

This hand-held shower holder works perfectly. I don't like having to 'glue' something like this to the tile in my shower BUT I dislike even more having to drill holes and screw things into the tiles. The glue holds extremely well. I have no complaints. Just follow the simple directions and try to wait at least 2 days before placing any weight on it so the glue can 'cure'. It was well worth the $20 to find this item. The hand-held shower nozzle that I have did not come w/ a wall attachment like…

This is a great solution for people that have shower wands mounted way TOO HIGH. Love this product & plan to install in our 2nd bath.

I mounted mine using bathroom, in shower command strips and it's holding up great. Great for adding a spot to stash my hand wand for washing my kids hair during bath time and for anyone who has younger kids needing a shower mounted a bit lower.

Follow the instructions fir adhearing the holder to the wall insuring that it does NOT get wet for 48 hours and it will hold well. Fits nicely to the handheld shower which we purchased at the same time. No complaints thus far.

This was very easy to install and the instructions were clear. Adhesion has been strong and I have not had any issues since installing it 4 weeks ago. This small device added versatility to where I can position my handheld shower head and I love it!

The adjuster is seated in silicone and impossible to tighten enough to support the wand at the proper angle. Plus you need a tool that most people don’t have to tighten it. I used 3M vhb tape to hold it on the wall which is doing the job well