Review on 🔧 Enhanced MICTUNING HD+ 12-Gauge LED Light Bar Wiring Harness Kit with 60Amp Relay, 3 Free Fuse, Blue Rocker Switch (2 Lead) by Kirt Phillips

Great product. The wiring harness to the wand and battery is 12 AWG wire and from the relay to the switch is 20 AWG wire, which is not a problem. The length was enough for all cables except those in the cabin. My battery is in the front corner of the engine bay on the driver's side. I had enough wire for the pole/battery. The switch wire would be long enough if you wanted to mount the switch low on the dash to the left of the steering wheel, but I added about 18 more inches of wire and placed it in my center consul (I drive a 2004 Silverado 1500) with other switches that I already have Bought from Mictuning for other accessories. The switch is great and has a nice smooth operation, but the harness is wired so that the bottom LED is always on and then the top one activates when it's turned on. I plan on changing this to light up when my chases are on, just like my others. Should be easy to cut and join. Overall a great hanger that was easy to assemble and works perfectly. Triple Row 783W 78300LM Cree 7D Spot Flood Combo Beam for Jeep ATV AWD SUV 4WD 4x4 Pickup) with this suspension and with Mictuning Rocker Switch Holder Body Kit to hold the switches. for 5-pin ON/OFF rocker switch - set of 4 pieces. I also used an Omotor 1999-2006 Chevy Silverado/GMC Sierra metal windshield mounting brackets for the top roof off-road 52" LED work light. Mounting brackets that fit perfectly with no modifications to my truck. I bought a socket wrench at my local Menards store for less than $20 to install the fasteners.