Review on 🚗 Rough Country 7572 Front Adjustable: Enhance Your Vehicle's Performance by Tyler Dorsey

Received quickly from the manufacturer. The quality is excellent and the ball joint end as well as the socket end are interchangeable unlike the stock end. Be sure to read the section in the instructions on how to adjust the length. Basically you use a plumb line from the top of the spring (same spot on each side) and measure to the back of the caliper. Compare both sides and lengthen or lengthen the bar by 1/2 that amount to center it. I adjusted, rolled, checked and adjusted a little more. For the installation I put the chassis on stands and the axle on a jack. I was able to move the axle just enough to push through the screw on the axle. Also, the ball joint in the chassis is fun. If you have a pickle fork, this is easiest. I didn't, so I had to hit 3# hard with a hammer a few times.