This is a heatsink for M.2 drive. The device is 2 inches high, 3 inches long and 7/8 inches wide. The power cord is 17 inches long. It comes with 2 thermal silicone strips, mounting screws, a small screwdriver, Velcro cable manager and paper instructions. To mount the device, remove the base, apply thermal silicone to the top and bottom of the M.2 drive, and screw the base back into place. Then insert the card into position on the motherboard and screw it in place. Finally, connect the power cable to the 4-pin fan connector. The fan runs at 8500 rpm (non-adjustable) and produces an airflow of 2.87 cfm. I like the cooling performance of this radiator. I have an M.2 drive that is under stress so I was afraid of burning it because the heat is too high. This heatsink makes using the drive much more comfortable like I do. The radiator was fairly easy to install and the printed instructions with photos are clear. My computer is in a very large case, so I had no trouble installing this heatsink with all the other components and fans. If you have a mini-ATX, you should probably take careful measurements before ordering. All in all a good solution for additional cooling of a busy M.2 drive.
CPU cooler ALSEYE H120D, black/RGB
16 Review
Netac NV7000 NT01NV7000-1T0-E4X SSD, M.2, 1.0Tb, PCI-E x4, Read: 7200 Mb/s, Write: 6800 Mb/s, 3D NAND, 1400TBW, NVMe
11 Review
Cooler ID-Cooling SE-224-XT White (Intel LGA2066/2011/1200/1151/1150/1155/1156// AMD AM4)
26 Review
XPG GAMMIX S11 Pro 512GB M.2 SSD AGAMMIXS11P-512GT-C
43 Review