Review on Lippert 296649 Electric Brake Assembly by Adam Clemons

Brake pads appear to be of very good quality (as opposed to OE poor quality). Two problems: First, the sprocket adjuster for adjusting the brakes to the drum is not accessible through any of the openings on the back of the skid plate. . .Make an initial adjustment by removing and then replacing the steel brake drum until the correct resistance is achieved. Two ports are positioned incorrectly. Second, there is a light spring designed to push the magnet directly against the inner surface of the brake drum. The spring was installed incorrectly, resulting in the magnet not moving directly towards the drum. It's easy to fix. (NOTE: The photo of the entire assembly is upside down.)