Review on EVIL ENERGY Baffled Oil Catch Can Reservoir Kit | Red Aluminum Tank with Fuel Line - 300ml Capacity by Robert Pierce

I initially wanted a different mount and decided to look at the Moroso mount which was listed as included with this tank. The bracket specified is part number 63401. It is too large. According to the specified closed size, it will never be drawn into the tank. Some research and I found that the Moroso 63402 mount is the correct size as shown in my picture. I bought two of these tanks, one for each side. Haven't used them yet but they seem to be working fine. Three pairs of different size fittings are suitable for most applications. On the fresh air side, my application uses 5/8 and 1/2 fittings. Another must use both 3/8 ports. One tank had burrs in the threads where a fitting should have gone. Since I don't have a faucet that big, I used one of the unused faucets to clean the threads. Just apply some lube and let it run like a faucet. Remember that if you are using a filter (the PCV system should not use a filter) you will need one of the two 1/2 fittings provided. The filter plug has an O-ring. I added an o-ring to the dipstick.