Review on 💧 ROVATE LED Bathroom Sink Faucet - Single Hole Chrome Waterfall Faucet with Glass Spout and Single Handle by Brian Lee

UPDATE - 05/30/21 - At night the cold pipe broke and water flooded in the bathroom. Everything is wet. Its going to rain 3 days and will be no sun. Everything is wet. A big mess.The reason the cold pipe broke is because the hose if low quality. The metal braids came off completely at one point and under it the pipe broke as well. There are few other places the metal braids are off and you can see little rusty spots. Thats because of the condensation, I believe. Since the hose is not a standard 3/8 to 1/2 I am not able to find it locally or in Home Depot. I have checked on Revain and see that its M10 and 1/2 inch. I will order one and lets see if I get the right one.Oh,, also the lights, they stopped years ago. I think ran probably for 6-8 months and then stopped working. Changed the batteries as well but nothing.----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------I installed it and it works good. The pipes that are provided with this faucet are I believe 12inch and they are small. I had to get a connector to extend the original pipe. Since this faucet uses a special pipe so Home Depot dont sell it. You might have to go to a local hardware or plumbing store. I didnt had time to look for such shop so I bought an extension from Home Depot.You might also have to widen the hole in the sink a bit to properly fit it. If you widen it extra then this faucet wont fit.After I installed the faucet works fine. The water pressure is huge so the water falls out of my sink if I fully turn it on. The lights work fine. On cold water its Blue. On warm water its Green and on hot water its Red. The colors change suddenly. I was expecting it to change rhythmetically or slowly. Not a great deal. The light lights up enough to know where to look for soap to wash hands in dark.There is a small sensor in the side around the back that senses the water temperature. The water has to reach in the back in order for the sensor to work and thus the light. If you open the water pressure low then the water might not go in the back cavity to touch the sensor and the light wont turn on. You turn up the lever a bit and the water rushes in the cavity in the back and it touches the sensor and it lights up.Now, when you turn the faucet/water off some water might stay in the cavity and it will not turn off the light. This is because the water is touching the sensor. To turn the light off you have to turn on the faucet again so the water goes in the cavity in the back and then immediately turn it off. This way the water goes in the back in the cavity and by quickly turning it off the water which wa previously staying there leaves the cavity too. Thus the light turns off.Overall a very good faucet for a good price. I am going to order another one for the other bathroom.