Review on MotoFab Lifts F150 1 5 Leveling Compatible by Ryan Williams

Several reviews state that the screws on the 1.5" alignment kit are too long. Not if installed correctly. The bolts do not go through the frame into the top of the strut. The seal has 6 holes. Three holes are drilled on the bottom and three holes on the top. The three holes drilled on the bottom are also threaded. The first step after opening the box is to mount the included socket head screws into the threaded holes. Thread the screws from the bottom of the spacer through the hole to the threads. Secure them and use screw lock. Give it time to dry. Then screw it to the rack and install the rack in the truck. Some people install the spacer on top of the brace first, then insert a screw through the frame into a threaded hole in the spacer. The screws will fail and appear long. Even if you use shorter bolts you create a dangerous situation. The spacer is made of aluminum. When you tighten the bolts, you pull the threads out of the spacer and the strut will not attach to the truck frame. See 4 attached pictures.