12V 1157 22 SMD LED Bulbs For Car Brake Light, Tail Light, Reverse Lamp - 10-Pack (White) By HOTSYSTEM Review

Bulbs were not as bright as standard 1157,s and the throat is so short that it is almost impossible to push in and turn. Could be a great product and take over the market if they just beef up the lumens and lengthen the throat.

Needed a couple bulbs for an ATV and price of 10 was close enough to price of 2 so I grabbed the 10 pack. Both bulbs worked fine so I tossed a couple in my car. No tail light only brake lights. I tried 10 including the ones from the ATV. All worked on the quad but only gave brakes on the car. Tried a different car, same thing. Measured voltage at the socket as well as hooked the bulbs directly to a battery. Every test indicates that they should work but apparently these magic demon bulbs will…

These will not functionally replace an 1157 bulb. They don't have dual function (turn signal and market light combined). What a disappointment. Wish I had seen that somewhere in the description.

All 10 bulbs would light when started in socket. As soon as you turn to lock bulb in place, as required to not fall out, the bulb stops working.

Out of the 10 bulbs in the pack of 10 I bought one worked. Very disappointed but should have known with a price to good to be true.

Can't tell the difference between the tail lite or the brakelite. Cannot see any turn signal with holding brake That's my review.

I tried to use these to replace the dual filament rear lights in our LandRover.Initially they seemed to work but were not as bright as I'd hoped.After driving to town with my wife following me, she informed me I had no tail lights nor brake lights! BOTH sides were out.Fortunately I had to stop at the dealer for a different problem and bought two regular incandescent bulbs which worked just fine.

Marked as an 1157 bulb, but doesn't work as an 1157. Only works when brake is depressed, but should also work when taillight is on. 1157 is originally a dual action bulb, but the LED isn't.

These lights are OK,however, there is very little difference between regular light and what would be the brake light. I will NOT take that kind of a chance with my motorcycle. I will use them on something, maybe my drag car, but nothing on the street.

These do not work as they should daytime running lights don't work on any of the bulbs, only the stop lamps, they must have an open circuit in the bulbs. All 10 do not work. Put my original bulb in and it works fine.

I really hoped these would work. I tried them in 3 different vehicles. Once you twist to lock them in, they stop working. Thanks to ebay for their excellent return policy. They're on their way back. Don't bother buying these.

goodI have a problem with these bulbs which are to brake but do not work to stop one they do not give the second light is reporting that is slowingalthough contacts are two bulbs

I didn't think about it when I bought these bit they are one directional. Really needed a multi directional. But they work just fine.