2009-2018 Dodge Ram 1500 2500 3500 LED 3Rd Brake Light - KanSmart High Mount Stop Light 55372082AF Review

No instructions, and installation can be puzzling if you're new to auto work. Connector replaces bulb and uses sketchy Christmas light-style wire draped over plastic. We'll see how well that holds up over time.Worse yet, as others have noted, the 1/4" foam gasket attached to brake light assembly does not sufficiently compress thus prevents a flush, tight mount. 2 screw gaskets are supplied but they are insufficient to seal correctly. Supplied screws were not close to threading correctly, so I…

Nothing wrong with the product or the company - just wasn’t right for my truck. Wasn’t as bright as I had hoped and it sat too ‘proud’ for my preference.

Super easy install but quite disappointed because it only lasted a month and 1/2 before I noticed 70% of the white LEDs no longer lit up which makes looking in the bed of your truck very difficult and let's be honest your probably buying this for looks so all those LEDs burnt out looks worse than your stock brake light

Looks great on my 2012 F150 like it should’ve been there from the factory instead of the OEM part. It was easy to install as long as you understand that the wires plugged into the light socket.

No alterations needed. This product uses the same plug and the screw holes are the same. Five minutes to remove and reinstall this light. The LED's are nice and bright.

I like the how bright it is, good quality but it didn't fit like the original the bottom part had an opening and I had to use caulk to fill it in, other than that it worked fine!

Great product and plugnplay but it never turns off. It's always just barely on. No idea why, has not drained my battery. I left my truck for a week and it started right up. Installed on 2007 F150

The light didn’t really fit and I broke it trying to get it into place. The white lights are crazy bright tho! That's my review.

For the price you can’t go wrong. Install was easy as it took less then 10 minutes. Quality of the product is not greater then what you are paying for but worked and fit as described and thick foam seal should keep water out.

Very easy to install, just have to use factory screws instead of the ones it came with. Only issue is the gasket being too thick. F150s are notorious for leaks from the third brake light so it makes me feel like that gap will eventually be a problem.

noi instructions provided but it was easy plug and play shows bright and works great would have given a five but no instructions.

I have a OBS 97 F250 HD. gaps are located at both ends where rain can seep into the cab body. I will update with a photo. It may fit the 92 and earlier cab but I do not know.

Was so poorly designed I couldn't imagine this company ever installed this light on a 2014 Chevy Silverado, or any human being ever installed one on any truck for that matter. I could have built one out of Playdoh that fit better than this garbage. If negative stars were a thing I'd give it -10

Product looks good and easy to install. I believe it is advertised to have a backup light and it doesn’t. BThe brake light and bed light work well.

From a distance the break light looks good from a distance. As others have stated there is almost a quarter inch gap around the entire light. I do not think it will leak but I think that I may put an extra layer of silicone around it just to be on the safe side. I also would like to point out that there is no reverse light. There is not meant to be. That is the light that comes on when you unlock/open the doors so that there is a little light shining in the bed of the truck. Over all easy to…

First off, it looks great… but that’s about it. It’s not incredibly bright, but it’s a third for a reason. It lights the bed up and is alright… the most important, SAVE YOUR SCREWS. The thread is different than the original so if you want to put it in, gotta use the old screws to hold it in place. Lastly, the seal is THICK and pushes the light probably an 1/8” away, but unless you’re looking at it from the top down, you won’t notice it

I was surprised I bought the smoked lens. My fault. The white lights really do not get bright enough to do the cargo light job but are visible. The red break light is bright enough to do the job and get me though the state inspection.Installation was a breeze. Just plug it into the factory harness where the light bulbs would normally go. It does sit "proud" so I used some silicon seal to make sure it did not leak.