Header banner
Revain logoHome Page
🔵 efficient cooling solution: adwits 12-pack thermal conductive silicone pads for ssd cpu gpu led ic chipset cooling - blue logo

🔵 Efficient Cooling Solution: ADWITS 12-Pack Thermal Conductive Silicone Pads for SSD CPU GPU LED IC Chipset Cooling - Blue Review

4

·

Average

Revainrating 4 out of 5  
Rating 
4.0
🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔵 Efficient Cooling Solution: ADWITS 12-Pack Thermal Conductive Silicone Pads for SSD CPU GPU LED IC Chipset Cooling - Blue
img 2 attached to 🔵 Efficient Cooling Solution: ADWITS 12-Pack Thermal Conductive Silicone Pads for SSD CPU GPU LED IC Chipset Cooling - Blue
img 3 attached to 🔵 Efficient Cooling Solution: ADWITS 12-Pack Thermal Conductive Silicone Pads for SSD CPU GPU LED IC Chipset Cooling - Blue
img 4 attached to 🔵 Efficient Cooling Solution: ADWITS 12-Pack Thermal Conductive Silicone Pads for SSD CPU GPU LED IC Chipset Cooling - Blue

Description of 🔵 Efficient Cooling Solution: ADWITS 12-Pack Thermal Conductive Silicone Pads for SSD CPU GPU LED IC Chipset Cooling - Blue

Excellent thermal conductivity: Made of thermal silica gel with heat conductivity of 6.0 W/Mk. Great safety and stability: electrical insulation, in -40 °C - 200 °C will not melt. Wear Resistant, anti static, fire retardant, buffering, no toxic, odorless, no corrosion, no stimulation, no damage to metal materials. Fits for Control board, motor, electronics, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules. Packed with 12 thermal pads, three sizes, each with 4 pieces: 20x67x0.5mm, 20x67x1.0mm, 20x67x1.5mm. Easy to install, you can select most suitable thickness and cut the required sizes. Great replacement for traditional heat sink compound grease paste

Reviews

Global ratings 4
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

Good thermal pads, drop 4-5 degrees celsius

I used them to replace the stock pads on my Sapphire Nitro+ RX 480 8GB. The VRM temperature increased from a maximum of about 79 degrees Celsius with standard pads to a maximum of about 75 degrees with these new pads. According to HWInfo64, the average VRM temperature was also about 5 degrees cooler. I ended up just using the thickest of the three sizes (1.5mm) and using a total of 2 whole spacers to cover all the required components (I just put the new spacers in place of the old ones). The…

Pros
  • electronics
Cons
  • small things

Revainrating 1 out of 5

Anyone who complains that thermal pads don't stick: They shouldn't be.

Make sure the chips are properly cleaned before use. If it is not a new surface, use rubbing alcohol and a cotton cloth to remove any oily residue. It may need a little scrubbing with an eraser to remove everything. sticky so it will likely stay in place if you move the drive/device, but I still recommend putting the item down, attaching the backing and then mounting the heatsink on top. moving the map. Cut a strip into smaller pieces to replace the RAM/VRM-TP on a small card. Just letting the…

Pros
  • Internal components
Cons
  • Functionality

Revainrating 5 out of 5

Works with many electronic devices, not just computers

I got different sizes to improve heat dissipation in my NUC used for HTPC. But I've since put it to good use in my high power flashlights to fill in the gaps and offer better heat dissipation, meaning longer runtime at very high settings. This pillow is great as it is malleable so can be stretched a bit to adjust the thickness and length to fit a very tight space. Heat is the #1 killer of electronic circuits and components, so having an efficient way to keep the temperature down really helps…

Pros
  • Computers and Accessories
Cons
  • It's hard to remember but it was

Revainrating 5 out of 5

There's a reason they're so cheap.

My Asus router gets a little warm so I decided to replace the tiny factory thermal pads with larger ones that cover a larger surface area. After 2 years of continuous use, the factory seals become fully flexible and can be easily removed and reinstalled. Same goes for the thermal pad on the SSD on my 3 year old Dell XPS laptop. The thermal pad can be removed and reattached. Yesterday I attached them to the bottom of the router board as soon as I received them. I noticed a temperature drop of…

Pros
  • Easy to install, you can choose the most suitable thickness and cut it to the size you want. Excellent replacement for traditional plastic heatsink grease
Cons
  • Very expensive