🚗 Enhance Performance with Beck Arnley 072-9689 Clutch Slave Cylinder Review

Identical to Original Equipment parts. It is a pity that this BMW Mini Cooper has serious defects that led to the failure of the release bearing and the almost destruction of the bell housing. I redesigned mine and modified this slave cylinder so that it no longer damages the clutch or bell housing. If you are having problems with the clutch I would suggest replacing the throwout bearing rather than waiting for it to blow up and take everything else with it.

So far so good. There can be no talk of leaks or other failures. Some of these aftermarket slave cylinders seem to give people trouble. Especially with the fatigue and flexing of the plastic slider. Other aftermarket models I've compared have a black plastic slider under the dust cover. This one from Beck Arnley is a khaki color that looks just like the real thing. Maybe the ones with the black push rod are the lowest kind of plastic. Also do your homework on the correct procedure to bleed this

Perfect for my 2004 R53. If you're having trouble engaging a gear, that could be your problem. If you find a cylinder on your car and notice that it is leaking, this is most likely your problem. The trick to bleeding is to squeeze the clutch cylinder before installation to remove all air from the cylinder. I used a piece of wood with a hole drilled in it and 2 long bolts going through the wood and into the cylinder. ModMINI has a great video that walks you through the whole process. Difficulty…