Case fan ID-COOLING XF-12025-SD, black Review

I put it on blowing, set the temperature / speed through the BIOS. As a result, the temperature of the processor became 6g lower. For blowing there are 3 fans with a flow below.

Providing an honest analysis.If necessary, for example in the heat, it is possible to dissolve the speed and, despite the noise, cool the system.

An excellent turntable for my money, it has risen in price a little now, I took it at 21 for 350. Year in use flight is normal! One of these days I will order another one, otherwise the summer will be hot in the yard)) As for the noise, I’ll say that put the case on a normal thickness and you won’t hear it.

Replaced old Termaltake with 800 rpm. In order not to make too much noise, I set it to rotate less than 1200 rpm. In this mode, the CPU temperature dropped by 5-10 degrees. Generally satisfied.

Not the first time I took acomoler from id-cooling, but either it won’t fit me, or thecomoler is really bad (not very). The onlycomoler that really pleased me with its quality and characteristics was id-cooling df12025-argb-xt. As for this misunderstanding, I can say that for your money it may not be a bad option, provided that you do not care about noise and only need airflow. In all other cases, he recommended to look at ebay, Yulu or to hiscomputer friend. On the same ebay, you can find…

I connected it like two additional fans to blow hot air over the cooler. One just got up over vrm, the second over the operative.

Some pros: A good, so to say, quiet fan (cooler). For the money, it really justifies. Mount included. The image corresponds to the description. Has cons: So far I have not seen any shortcomings. The flight is normal.

in general, a normal cooler. not fat. controlled by the motherboard, turns normally, installed as an additional supply for the system unit paired with the exhaust.

4 pin, it blows decently, at medium speeds it is almost inaudible, I can’t say anything about the noise at maximum speeds, since the PC is office, the processor is cold Athlone 3000G, the mid tower case, the scenario is only surfing, social networks, that is, not any games (I'm attaching a screen of temperatures). Please note that two modifications are produced under this marking, 9 and 11 blades, as well as differences in maximum speed and different air flows, in general, the variation with 9…

I had to buy 2 more coolers for blowing, as I installed a new card. There are no free 4pin connectors on the mother, so I connected it to 3pin, the result is that the cooler is always full, which gives not only such a frail noise (2 coolers are joking louder than 5 that are already standing) so I ordered an expansion controller and I will lower the speed With its pros: No backlight Price 250 The brand that collects all cooling With its cons: At maximum speeds, very high noise, higher than the…

When connected to a motherboard with a PWM controller, two of these fans quite easily cope with blowing through the computer case. They work very quietly. If the load on the computer is short-term, it seems to "sigh". And then just silence. And this is in the presence of TWO views in the body. Noise is present under constant load. But it is connected rather with the noise of air on the grilles of the case.

I installed it in the Zalman Z3 plus black case in the lower front pocket. Above is a native zalman cooler 120 mm with blue backlight and a constant speed of 1200 rpm. It sounds ridiculous, but I checked how this and that coolers blow by putting my hand under the airflow and was pleasantly surprised that at lower frequencies, the ID-COOLING cooler creates more airflow and is quieter up to high speeds. For 308 I consider an excellent case cooler.