Complete 7Pcs Diamond Hole Saw Set With Guide Jig And Centering Locator For Glass, Ceramics, And Tile Review

I really liked the suction cup guide, but the blades were really low quality. They took forever to cut through porcelain tile, and were useless after just a couple cuts. I also had 2 of the bits bend while using them. Not only was that dangerous, it messed up my tiles.

Drilled a 2.76 hole in porcelain tile no problem. Did what I needed it to. Take it slow and easy and keep wet and your good to go!

So this set was a life saver and made my tiling project so much easier. The hole saw guide is sturdy and really helped to make the cuts much easier. The bits themselves are good quality and grabbed the tile very quickly. The set came with some instructions, which was nice. Highly recommend this set for your tilling needs

Makes drilling holes on tiles and glass possible. The guide only works when you're drilling near a smooth glass surface but its good to have, makes drilling a lot easier.

It cut through ceramic tile quickly and easily. The jig to keep the bit steady on the tile worked perfectly. If you need to drill holes in tile, I highly recommend this set.

Hubby has found this tool invaluable for our latest tiling project in our bathroom. 3 holes down, 3 more to go. Highly recommended.

Trying to drill porcelain is a pain in the butt since the bit slips. This jig held the bit steady and so I cut perfect holes right where I wanted them. Lots of bits. All of them worked good - used three of them.

The cutting attachments work well with porcelain tile if the material is placed on concrete with a thick towel or cardboard in between. The problem with this kit is the Jig Fixture. You need someone to hold the fixture in place while the old person drills the hole. Even with someone holding the fixture, it will typically drift about a 1/4" before the tile is scored. If accuracy is required, I wouldn't purchase this kit.

I used these for my bathroom remodel. Mostly just needed the larger hole saw. I did end up using the smaller ones instead of another set I had gotten just because having the guide was a big help. I definitely recommend getting these with the hole saw guide.

I needed to replace one 12x12 ceramic tile in the bathroom. Unfortunately It happened to be the piece where the shower handle, diverter and pipe come through. In order to cut holes through the tile, I needed to to buy some tile hole saw bits. I didn't need or want the expensive ones for this project because I wont be using these very often. After measuring out and marking the hole locations, I determined the sizes of bits I would need and got to work. You can cut a hole without the jig that…

The plastic addition didn't work great. Moved and eventually I was burning side of it. It seems like good idea but I didn't find it useful. Eventually I was doing it the old way, 45 degree, start drilling and then tilt to vertical to complete the circle.I also had an issue with one of the biggest drill bits, it got stuck in a tile and bend, really bad, that I can't use it. Would be great to be more rigid. Smaller drill bits are fine.

Used it today to cut hole in tile and it worked great. Much better than I expected. Plus I got six bits for the price of what one cost at the big box store.

My first amazon review. I’ve been ordering items for over a decade from amazon. This is by far the worst product I have ever ordered. Smooth bits don’t grip in the drill. Didn’t even get through one cut before the first bit broke. Had to go to a bigger bit. That broke too. Worthless. Save your money and buy something else.

Works well cutting holes in tile. I have used in on porcelain floor tile only. The walls of the bits are quite thin and bend easily. I have damaged 2 of the bits already after cutting 8 holes of various sizes. Since I only needed the set for a kitchen remodel, it isn't a big deal. If you need to cut a specific size over and over, you may want to invest in a higher quality bit.

Had to drill two separate holes. First used the largest one, drill only half way after 25 minutes and drilling slow. Second need to drill a smaller hole and it almost went thru but broke when was almost done. Seller reached out and sent a new one. Great Customer Service! Would buy again just drill slow and add more water.

Like at contractor, you need to save money, I prepared quality only, I give it a chance to this product and for the price I think good investment, I give 5 start because never broke up or scratch my tiles…

Worked pretty well. Although to use the biggest hole saw, I had to drill some more holes in the plate for the rollers that hold the saw. The hole saw itself cut the tile very well.

Very good design. Drill slow with water and let bit do the work. These work better than some of the higher priced ones I own.

Bits worked get but the guide didn't work at all first of all it wouldn't stick to my tile. Second the 3" bit hits the plastic guide.But using a 45° angle approach

Cut well. I used several of the saws and they cut well and held up for several uses. Make sure to use plenty of cooling water and go slowly.